Alpha Ceramica Dry Polishing for Natural Stones 4"
Pickup available at Dynamic Stone Tools Warehouse (Manassas Park, VA)
Usually ready in 2 hours
Alpha Ceramica Dry Polishing for Natural Stones 4"
Description
Description
Alpha® Ceramica Dry Polishing Discs for Natural Stones (4")
Alpha® Ceramica Dry is a hook-and-loop dry polishing system for all natural stones and cement-based composites such as concrete and terrazzo. A thicker diamond layer delivers better finish quality and longer life than typical dry pads. The 4" discs run on low-RPM sanders and polishers (best around 4,000 RPM) and are designed for edge polishing applications. The full grit sequence — #60, #200, #500, #1000, #2000, and #3000 — carries the edge from shaping through high-gloss finish without water.
Features
- Dry polishing for all natural stone and cement-based composites (concrete, terrazzo)
- Thicker diamond layer for longer life vs. typical dry pads
- Hook & loop backing — pairs with Alpha® backer pads
- Six-grit sequence: #60, #200, #500, #1000, #2000, #3000
- Designed for sanders & polishers (4,500 RPM max; best around 4,000)
- Compatible with hand-held wet polishers
| Part No. | Size | Grit | Color | Max RPM | UPC |
|---|---|---|---|---|---|
| CD40060R | 4" | #60 | Blue | 4,500 | 749173520846 |
| CD40200R | 4" | #200 | Yellow | 4,500 | 749173520747 |
| CD40500R | 4" | #500 | Red | 4,500 | 749173520754 |
| CD41000R | 4" | #1000 | Dark Green | 4,500 | 749173520761 |
| CD42000R | 4" | #2000 | Light Green | 4,500 | 749173520778 |
| CD43000R | 4" | #3000 | Brown | 4,500 | 749173520785 |
| CD40KIT | 4" | Set of 6 (All Grits) | Assorted | 4,500 | 749173520860 |
- Mount a 4" Alpha® backer pad on a sander or low-RPM polisher (4,500 RPM max). Use a flexible backer for curves/bullnose and a rigid backer for flat or straight edges.
- Start with #60 to shape the edge. Run dry — Ceramica Dry is engineered for dry use; water can cause premature wear on some grits.
- Use two passes across and one vertical for each grit. On average 2 to 3 passes per grit are enough — do not rush.
- Step through every grit in order: #60 → #200 → #500 → #1000 → #2000 → #3000. Skipping grits yields unsatisfactory results.
- Run at or near 4,000 RPM for best results. If burn marks appear, reduce pressure and increase RPM for better air cooling.
- Do not use on engineered stone / quartz for dry polishing, on floor-polishing machines, on edge-polishing machines, or for top polishing of seamless countertops.
Blue (#60 grit) — 4" (102 mm) — Hook & Loop — Dry Diamond Polishing Disc — CD40060R
| Part No. | CD40060R |
| UPC | 749173520846 |
| Size | 4" (102 mm) |
| Type | Dry Diamond Polishing Disc |
| Color | Blue (#60 grit) |
| Attachment | Hook & Loop |
| Max RPM | 4,500 RPM (best around 4,000) |
| Recommended For | Initial dry grinding / shaping on edges |
| Packaged Weight | 0.10 lbs |
| Package Dimensions | 4.25" x 5.25" x 0.25" |
| Commodity Code | 6804.21.0000 |
| Country of Origin | Japan |
Yellow (#200 grit) — 4" (102 mm) — Hook & Loop — Dry Diamond Polishing Disc — CD40200R
| Part No. | CD40200R |
| UPC | 749173520747 |
| Size | 4" (102 mm) |
| Type | Dry Diamond Polishing Disc |
| Color | Yellow (#200 grit) |
| Attachment | Hook & Loop |
| Max RPM | 4,500 RPM (best around 4,000) |
| Recommended For | Intermediate dry polishing on edges |
| Packaged Weight | 0.10 lbs |
| Package Dimensions | 4.25" x 5.25" x 0.25" |
| Commodity Code | 6804.21.0000 |
| Country of Origin | Japan |
Red (#500 grit) — 4" (102 mm) — Hook & Loop — Dry Diamond Polishing Disc — CD40500R
| Part No. | CD40500R |
| UPC | 749173520754 |
| Size | 4" (102 mm) |
| Type | Dry Diamond Polishing Disc |
| Color | Red (#500 grit) |
| Attachment | Hook & Loop |
| Max RPM | 4,500 RPM (best around 4,000) |
| Recommended For | Intermediate dry polishing on edges |
| Packaged Weight | 0.10 lbs |
| Package Dimensions | 4.25" x 5.25" x 0.25" |
| Commodity Code | 6804.21.0000 |
| Country of Origin | Japan |
Dark Green (#1000 grit) — 4" (102 mm) — Hook & Loop — Dry Diamond Polishing Disc — CD41000R
| Part No. | CD41000R |
| UPC | 749173520761 |
| Size | 4" (102 mm) |
| Type | Dry Diamond Polishing Disc |
| Color | Dark Green (#1000 grit) |
| Attachment | Hook & Loop |
| Max RPM | 4,500 RPM (best around 4,000) |
| Recommended For | Final dry polishing on edges |
| Packaged Weight | 0.10 lbs |
| Package Dimensions | 4.25" x 5.25" x 0.25" |
| Commodity Code | 6804.21.0000 |
| Country of Origin | Japan |
Light Green (#2000 grit) — 4" (102 mm) — Hook & Loop — Dry Diamond Polishing Disc — CD42000R
| Part No. | CD42000R |
| UPC | 749173520778 |
| Size | 4" (102 mm) |
| Type | Dry Diamond Polishing Disc |
| Color | Light Green (#2000 grit) |
| Attachment | Hook & Loop |
| Max RPM | 4,500 RPM (best around 4,000) |
| Recommended For | Final dry polishing on edges |
| Packaged Weight | 0.10 lbs |
| Package Dimensions | 4.25" x 5.25" x 0.25" |
| Commodity Code | 6804.21.0000 |
| Country of Origin | Japan |
Brown (#3000 grit) — 4" (102 mm) — Hook & Loop — Dry Diamond Polishing Disc — CD43000R
| Part No. | CD43000R |
| UPC | 749173520785 |
| Size | 4" (102 mm) |
| Type | Dry Diamond Polishing Disc |
| Color | Brown (#3000 grit) |
| Attachment | Hook & Loop |
| Max RPM | 4,500 RPM (best around 4,000) |
| Recommended For | Final dry polishing on edges |
| Packaged Weight | 0.10 lbs |
| Package Dimensions | 4.25" x 5.25" x 0.25" |
| Commodity Code | 6804.21.0000 |
| Country of Origin | Japan |
Set of 6 (All Grits) — 4" (102 mm) — Hook & Loop — Dry Diamond Polishing Disc Kit — CD40KIT
| Part No. | CD40KIT |
| UPC | 749173520860 |
| Size | 4" (102 mm) |
| Type | Dry Diamond Polishing Disc Kit (Assortment) |
| Contents | One pad each of #60, #200, #500, #1000, #2000, #3000 grits |
| Attachment | Hook & Loop |
| Max RPM | 4,500 RPM (best around 4,000) |
| Recommended For | Full dry edge polishing sequence on natural stone, concrete & terrazzo |
| Packaged Weight | 0.77 lbs |
| Commodity Code | 6804.21.0000 |
| Country of Origin | Japan |
| Property | Detail |
|---|---|
| Application | Dry edge polishing on natural stone, concrete, terrazzo |
| Attachment | Hook & loop |
| Max RPM | 4,500 (best around 4,000) |
| Sizes Offered | 4 in (102 mm) |
| Grit Sequence | #60, #200, #500, #1000, #2000, #3000 |
| Diamond Layer | Thicker than typical dry pads for longer life |
| Backer Pads | Flexible for curves/bullnose, rigid for flat/straight edges |
| Recommended Tools | Low-RPM sanders & polishers; hand-held wet polishers OK |
| NOT For | High-speed grinders >4,500 RPM, floor machines, edge-polishing machines, top polishing of seamless countertops, engineered stone (when run dry) |
What materials can I use Ceramica Dry on?
Ceramica Dry is designed for all natural stone and cement-based composites such as concrete and terrazzo. It is not recommended for engineered/quartz surfaces when run dry.
Can I use Ceramica Dry on an angle grinder?
No. Ceramica Dry is not designed for high-RPM machines above 4,500 RPM. Use it on low-RPM sanders or polishers. Variable-speed grinders require operator verification of RPM.
What is the lifespan of a Ceramica Dry disc?
It depends on the material and proper usage (grit sequence, RPM, pressure). The thicker diamond layer extends life compared to typical dry pads.
What sizes are available?
Currently the 4" diameter is available. Smaller diameters can be adapted by using smaller backer pads.
How many passes per grit?
On average 2 to 3 passes per grit, using two across and one vertical. Never rush through a grit.
What is the optimal RPM?
Designed to run at 4,500 RPM or slower; works best around 4,000 RPM.
Can I use Ceramica Dry wet?
You can use water for engineered stone, but water causes premature wear on some grits, so wet use is not recommended.
Why does the #60 grit wear faster?
The #60 wears faster than the others because it is the shaping grit running dry, without the water cooling that wet resin pads enjoy.
I am getting burn marks — what should I do?
Reduce pressure and increase RPM toward 4,000 for better air cooling.
Can I use Ceramica Dry on a floor-polishing machine?
No. The discs are designed for edge polishing only.
Can I use Ceramica Dry on a single-head edge-polishing machine?
No. Ceramica Dry is not designed for automated edge-polishing machines.
Can I use Ceramica Dry for top polishing of seamless countertops?
Not recommended — the hook-and-loop system may produce a wavy surface on flat tops.
Flexible or rigid backer pad?
Flexible for curves and bullnose work, rigid for flat or straight edges.
Can I skip grits to save time?
No. Skipping grits does not work and always yields unsatisfactory results. Run the full sequence #60 → #3000.
Alpha® Ceramica Dry Polishing
⚠ WARNING: Cancer and Reproductive Harm — www.P65Warnings.ca.gov. Always wear appropriate PPE.
