Chem-Set 633 5-Minute Gel Epoxy Adhesive, 25 mL
Pickup attualmente non disponibile presso Dynamic Stone Tools Warehouse (Sterling, VA)
Ships same day from Sterling, VA on orders placed before 12 PM ET. Questions about fit or use? Call 703-957-4544.
Buying for a business? Trade pricing is on dynamicstonetools.net.
Descrizione
Descrizione
Chem-Set 633 5-Minute Gel Epoxy Adhesive, 25 mL
Chem-Set 633 is a two-component, 1:1 by volume gel epoxy from Chemical Concepts, supplied as a 25 mL dual cartridge. The thixotropic, non-sag gel holds its position on vertical and overhead surfaces. Chemical Concepts lists it for natural stone, wood, metal, ceramic and concrete, including countertop laminating and sink fastener attachment.
Features
- Two-component gel epoxy, mixed 1:1 by volume
- Thixotropic, non-sag gel that stays in place on vertical and overhead surfaces
- Working time about 4 to 7 minutes at 72°F
- Fixture time about 10 to 15 minutes; functional cure in 1.5 hours; full cure in 24 hours (72°F)
- Fills gaps up to 0.250"
- Lap shear strength 2,500 psi at a 0.010" bondline
- Service temperature -40°F to 200°F
- Bonds natural stone, wood, metal, ceramic, concrete and other rough or irregular surfaces
- Listed uses: countertop laminating, sink fastener attachment, signs, plaques, equipment components, general shop repairs and fixture bonding
| Property | Detail |
|---|---|
| Brand | Chem-Set (Chemical Concepts) |
| Product | Chem-Set 633 5-Minute Gel Epoxy Adhesive |
| Container | 25 mL dual cartridge |
| Type | Two-component gel epoxy |
| Mix Ratio | 1:1 by volume |
| Working Time | About 4 to 7 minutes (72°F) |
| Fixture Time | About 10 to 15 minutes (72°F) |
| Functional Cure | 1.5 hours (72°F) |
| Full Cure | 24 hours (72°F) |
| Gap Fill | Up to 0.250" |
| Lap Shear Strength | 2,500 psi (0.010" bondline) |
| Service Temperature | -40°F to 200°F |
| Consistency | Thixotropic, non-sag |
| Made In | USA |
| Shipping Weight | 0.1 lbs |
- One 25 mL Chem-Set 633 dual cartridge
- Dispenser or mixing accessories are not listed by the manufacturer as included
Read the Safety Data Sheet before use, wear gloves and eye protection when mixing, and test uncertain plastics or coated surfaces before production use.
