Akemi Akenova Tiger Grip 50 Adhesive 290 mL Cartridge

• High initial tack (approx. 350 kg/m²) grabs and holds heavy components immediately, easing single-hand assembly
• Stress-compensating, permanently elastic bond joint that absorbs movement and vibration
• High bonding strength with an elastic joint — suited to vertical and horizontal bonding
• No bleeding in the marginal zone on natural stone, as it is free of plasticisers and solvents
• Solvent-, silicone- and isocyanate-free; VOC-free; almost odourless; paintable
• Resistant to UV, humidity and weathering; temperature-resistant from -13°F to +176°F (-25°C to +80°C)
• Suitable for indoors and outdoors; good workability and smoothability

Recommended for fast, stress-compensating bonding:

• Assembly of sinks, backsplashes, window sills, steps, skirting boards, and mirrors
• Attaching substructures and rodding to countertops
• Surface-area bonding of natural stone slabs and tiles
• Bonding natural & engineered stone — granite, quartz, quartzite, sandstone, terrazzo — to mineral, metal, or wooden surfaces
• Very good adhesion on silicate surfaces (granite, concrete, glass) and on SPC (Stone Polymer Composite)

Limited / no adhesion on: plasticised plastics, polyethylene (PE), polypropylene (PP), and PTFE — a preliminary test is necessary.

For non-silicate or absorbent substrates, and for bondings exposed to moisture, apply the appropriate AKEMI® primer (see the AKEMI primer table).

1. Contact surfaces must be clean, dry, and free of grease and dust. Use AKEMI® Cleaner A on stone, tile, ceramic, glass, unpainted wood and metal; use AKEMI® Cleaner on plastics and painted surfaces.
2. Apply at a working temperature of 41°F to 95°F (5°C to 35°C). On larger areas, apply parallel adhesive beads at the required thickness, spacing them so no continuous airtight layer forms (a closed layer greatly delays curing).
3. Bond parts within approx. 10 minutes; smooth joints with AKEMI® Smoothing Agent.
4. Skin-formation time is approx. 10–20 minutes (depending on humidity and temperature). Cure builds roughly 2–3 mm of depth on the first day; thick joints cure more slowly.
5. For thin joints or vapour-tight substrates (metal, ceramic, glass), lightly moisten one surface just before bonding to speed core curing.
6. Remove uncured adhesive with AKEMI® Cleaner A or I; cured adhesive can be removed only mechanically. Curing is accelerated by moisture.

• For professional use only; use application equipment with a high gear ratio.
• Before full application, confirm compatibility on the actual materials — including any materials within reach of the curing vapours — to ensure no discolouration or damage occurs.
• No or only limited adhesion on plasticised plastics, PE, PP, and PTFE — carry out a preliminary test.
• Exposure to temperatures above 176°F (80°C) may discolour the bonded surface.
• Cured adhesive can be removed only mechanically.
• Store sealed in a dry, cool place at 41–77°F (5–25°C); shelf life approx. 12 months from production.
• Industrial chemical product — use only in well-ventilated areas and wear chemical-resistant gloves and eye protection. Always consult the AKEMI Safety Data Sheet (SDS) before use.

• 📄 AKEMI Stone Care Product Portal — Technical Data Sheet & SDS (manufacturer)