Resinoid Cut-Off Wheels vs Diamond Blades on Stone Shop Grinders
Resinoid cut-off wheels for steel and diamond blades for stone are not interchangeable on a shop grinder. Here is how to match the wheel to the job safely.
Dynamic Stone Tools |
Notizie e guide sulla lavorazione della pietra
Consigli esperti, guide pratiche e notizie del settore per i professionisti della lavorazione della pietra. Scopri la lavorazione di granito, marmo, piani di lavoro in quarzo, la manutenzione degli utensili e la gestione dell'officina.
-
-
Infrared Thermometers in the Stone Shop: Slab, Adhesive, Blade Heat
Infrared thermometers in the stone fabrication shop: how to correctly check slab, adhesive, sealer and diamond blade temperatures to protect bonds and tooling.
Dynamic Stone Tools |
-
Alpha Crossville Laminam Blade: A Thin Porcelain Panel Spotlight
A fabricator's guide to cutting Laminam and other thin porcelain panels, featuring the Alpha Crossville Laminam 4-3/8 in. blade and chip-control technique.
Dynamic Stone Tools |
-
Alpha MasonMaster Concrete Blade: A Hardscape and Masonry Spotlight
Alpha MasonMaster concrete blade specs: diameters, thickness, max RPM and arbor sizes for 9-16 in masonry saws, wet/dry cutting, and silica dust control.
Dynamic Stone Tools |
-
Through-Body vs Glazed Porcelain Slabs: Edges, Chips and Blade Choice
Through-body vs glazed porcelain slabs: definitions, chip risk, mitered edges, repair limits and diamond blade choice explained for stone fabricators.
Dynamic Stone Tools |
-
Makita 4101RH 5-Inch Masonry Saw: A Wet Cutting Spotlight
Makita 4101RH 5-inch masonry saw spotlight: verified specs, blade pairing, water-feed setup, and PPE for wet-cutting tile, masonry, and stone countertop trims.
Dynamic Stone Tools |
-
Alpha Sonic Wet Cutting Blade for Tile: A Chip-Free Tile Spotlight
Alpha Sonic wet cutting blade for tile: sizes, arbor, max RPM and chip-free cutting guidance for ceramic and marble tile on tile saws and angle grinders.
Dynamic Stone Tools |
-
Alpha Vortex Intricate and Flush Cutting Blade: A Specialty Spotlight
Alpha Vortex intricate and flush cutting blade: verified sizes, max RPM, Quad Drive mounting, bond types, and sink-cutout technique for granite and marble.
Dynamic Stone Tools |
-
Alpha Plus Diamond Blade for Granite: A Dry-Cutting Turbo Spotlight
Alpha Plus turbo diamond blade for granite: diamond layer depth, sizes, arbors, max RPM, dry-cutting technique, and silica dust controls explained in detail.
Dynamic Stone Tools |
-
Alpha Ultracut GPM Vacuum-Brazed Blade: A Multi-Material Spotlight
A spotlight on the Alpha Ultracut GPM vacuum-brazed diamond blade: sizes, materials it cuts, how brazed differs from sintered blades, and shop care tips.
Dynamic Stone Tools |
-
Cutting Thin Stone Strips and Pencil Liners: Blade Choice and Support
Learn how to cut thin stone strips and pencil liners without snapping them: blade choice, machine setup, sacrificial support and feed rate for stone shops.
Dynamic Stone Tools |
-
Diamax Cyclone Side Segment Turbo Blades: A Granite Cutting Spotlight
Diamax Cyclone Side Segment Turbo Blades cut granite and quartzite sink cutouts, plunge cuts, and corners without binding. Sizes, RPM, and arbor fit inside.
Dynamic Stone Tools |
-
Alpha Eclipse II Dry Diamond Blade: A Granite Cutting Spotlight
The Alpha Eclipse II dry diamond blade cuts granite, concrete, tile and brick without water. Specs, dry-cutting technique and silica dust control inside.
Dynamic Stone Tools |
