Tenax Marble Rust Remover & Restorer Kit — Rust Stain Removal and Re-Polish for Marble & Calcite Stone
En este momento, la recogida no está disponible en Dynamic Stone Tools Warehouse (Sterling, VA)
Ships same day from Sterling, VA on orders placed before 12 PM ET. Questions about fit or use? Call 703-957-4544.
Buying for a business? Trade pricing is on dynamicstonetools.net.
Descripción
Descripción
Tenax Marble Rust Remover & Restorer Kit — Rust Stain Removal and Re-Polish for Marble & Calcite Stone
A two-step Tenax care kit that first lifts rust staining from calcite-based stone, then restores the polished gloss. The rust remover uses Tenax's stone-safe chelate chemistry to draw iron staining out of marble, travertine, and limestone without the harsh mineral acids that can pit or dull the surface; the marble polishing restorer then rebuilds a high-gloss finish. Always follow the included product instructions and test in an inconspicuous area first.
| Property | Detail |
|---|---|
| Brand | Tenax |
| Kit Type | Two-step — rust removal + gloss restoration |
| Step 1 | Rust remover (stone-safe chelate chemistry) |
| Step 2 | Marble polishing / restorer compound |
| Suitable Surfaces | Marble, travertine, limestone, and other calcite-based stone |
| Rust Remover Action | Chelate formula draws out iron / rust staining |
| Restorer Action | Abrasive polishing compound rebuilds gloss |
| Restorer Mixing | Mix polishing powder with water to a toothpaste consistency |
| Restorer Coverage | ~30–60 g (1–2 tbsp) polishing powder per square meter |
| Restorer Finish | High-gloss polished |
| Method | Treat the rust stain, then buff the area to restore shine |
- Complete two-step system — remove the rust stain, then bring back the polish in one kit
- Acid-free chelate rust remover is safer on calcite stone than mineral-acid strippers
- Restores a high-gloss finish on marble, travertine, and limestone
- Ideal for spot-treating rust rings and iron staining on countertops, vanities, and floors
- Buff the polishing compound with a felt pad to the desired gloss
Removing iron and rust staining from marble and other calcite stone, then re-polishing the treated area back to its original gloss. Apply the rust remover per the label dwell time, rinse, allow to dry, then work the polishing restorer with water and a felt pad. Calcite stone may need re-sealing after treatment.
Wear appropriate PPE. Follow manufacturer instructions and safety regulations.
