MB Stone Care MB-3 Soap & Mineral
En este momento, la recogida no está disponible en Dynamic Stone Tools Warehouse (Sterling, VA)
Descripción
Descripción
MB Stone Care MB-3 Soap Scum & Mineral Deposit Remover
MB-3 Soap & Mineral is a non-acid concentrate that dissolves soap scum and hard water mineral deposits on natural stone, tile, glass and fiberglass. Because the formula contains no acid, it lifts build-up from shower walls, floors, doors, washbasins and bathtubs without the vigorous scrubbing or abrasives that dull a glossy finish. It dilutes 1 part product to 2 parts warm water, so a single bottle covers routine descaling through heavy, long-neglected build-up. MB Stone Care rates it a two out of five for technical difficulty, which places it within reach of both homeowners and professionals.
Features
- Non-acid chemistry dissolves soap scum and mineral deposits without acid attack on the stone
- Safe on natural stone, tile, glass and fiberglass shower and bath surfaces
- Also cleans porcelain and acrylic bathtubs, and composite granite sinks
- Works on most natural marble glossy surfaces, restoring a spotless shine
- Dilutes 1 part MB-3 to 2 parts warm water
- Breaks down hardened, long-accumulated build-up without abrasive tools
- No drying step required after rinsing
- Technical rating 2 of 5 (1 = easy, 5 = difficult)
| Part No | Size | Format |
|---|---|---|
| MB-3QT | 32 fl oz (1 quart / 0.95 L) | Concentrate |
| MB-3GAL | 128 fl oz (1 gallon / 3.79 L) | Concentrate |
- Put on rubber gloves to avoid skin contact, and wear eye protection to guard against splashing.
- Test the diluted product on a spare tile or an inconspicuous area before treating the full surface.
- Dilute 1 part MB-3 to 2 parts warm water.
- Apply liberally with a sponge and let the solution stand until the soap scum begins to break up. Do not let it dry on the surface.
- Scrub lightly with a scrub brush or plastic scouring pad.
- Rinse thoroughly with clean water.
- Repeat the process if deposits remain. Drying the surface afterward is not required.
- Consult the Safety Data Sheet before use for full handling guidance.
| Property | Detail |
|---|---|
| Brand | MB Stone Care |
| Product Type | Non-acid soap scum and mineral deposit remover (concentrate) |
| Technical Rating | 2 of 5 (1 = easy, 5 = difficult) |
| Best Used On | Natural stone, tile, glass, fiberglass and more |
| Dilution | 1 part MB-3 to 2 parts warm water |
| Application Method | Mix, apply, dwell, scrub, rinse |
| Applicator | Sponge or sprayer (not included) |
| Suggested Frequency | Every few weeks to once a month, not daily |
| Developer | MB Stone Care |
What causes soap scum and mineral deposit build-up?
Bar soap reacts with minerals in tap water to form a film that clings to surfaces. Tap water high in calcium, magnesium or silica can also leave water spots on its own, even without soap present.
How often should I use MB-3?
It is not a daily stone cleaner. Use it every few weeks or about once a month to clear mineral deposits and soap scum.
Which natural stone surfaces can I use it on?
Used as directed, it is suitable for granite, quartz and marble, and it also works well on tile, glass and fiberglass. Always test an inconspicuous area first.
Is it suitable for composite granite sinks?
Yes. MB-3 cleans composite sinks and does not require hard scrubbing to be effective.
Can I use it on shower floors and shower doors?
Yes. Beyond natural marble glossy surfaces, it works on the range of bathroom surfaces including shower floors and doors.
Will it remove stains?
No. Soap scum and mineral deposits are not stains. Staining requires a different product.
What protective equipment should I wear?
Wear gloves at all times to prevent skin contact, plus eye protection to keep the product from splashing into your eyes. Consult the Safety Data Sheet for full safety information.
⚠ WARNING: Cancer and Reproductive Harm — www.P65Warnings.ca.gov. Always wear appropriate PPE.
