MB Stone Care Granite Honing Powder
En este momento, la recogida no está disponible en Dynamic Stone Tools Warehouse (Sterling, VA)
Descripción
Descripción
MB Stone Care Granite Black Honing Powder — Coarse 70 Grit, 1 lb
Granite Black Honing Powder is a black silicon carbide abrasive powder used to produce a uniform flat honed finish on granite. It is intended for medium to dark honed granite, where it leaves a smooth, uniform honed finish across the face of the stone. The powder is mixed with water on the surface into a heavy cream-like paste and worked with a hog's hair pad on a right-angle polisher or a floor machine. It is supplied in Coarse 70 grit and packed by weight in a 1 lb (0.45 kg) container.
Features
- Black silicon carbide abrasive cuts a uniform flat honed finish
- Formulated for medium to dark honed granite
- Produces a smooth, uniform honed face across the whole worked area
- Mixes with water on the surface into a heavy cream-like working paste
- Works with a hog's hair pad on either a right-angle polisher or a weighted floor machine
- Rinses and cleans up readily after the slurry is vacuumed off
- Supplied in Coarse 70 grit, packed by weight in a 1 lb (0.45 kg) container
- Developed under the MB Stone Professional program
- Clean the surface to be honed of all debris, sand and dirt.
- Mask off any surrounding surface that could be damaged by splatter.
- Strip the stone of any topical coating or crystallizer before honing — the powder must reach bare stone.
- Counters: work a target area of 2 to 3 sq ft using about 1/2 teaspoon of powder. Lay the powder in a circular pattern smaller than the pad, then add enough water to make a heavy cream-like paste.
- Counters: set a hog's hair pad on the paste and run a right-angle grinder or polisher at no more than 900 RPM (600 RPM is best), applying as much pressure as the machine will take before it stalls.
- Floors: work a target area of 10 to 12 sq ft using 2 oz of powder. Lay the powder in a circular pattern smaller than the pad, set the floor machine with a hog's hair pad on top of it, then release enough water from the machine tank to form a heavy cream-like paste.
- Floors: use a machine weighing between 130 and 160 lb (59 to 73 kg) and spinning at no more than 175 RPM.
- Follow a consistent, pre-planned working pattern, the same way you would with diamond pads, so the finish comes out even.
- Keep the slurry wet by adding water as needed, and add more powder as needed, until the desired finish is reached.
- Rinse well and pick up the water with a wet/dry vacuum.
| Property | Detail |
|---|---|
| Brand | MB Stone Care |
| Product Type | Honing powder |
| Abrasive | Black silicon carbide |
| Grit | Coarse, 70 grit |
| Package Weight | 1 lb (0.45 kg), packed by weight |
| Best Used On | Medium to dark honed granite |
| Counter Usage Rate | About 1/2 teaspoon per 2 to 3 sq ft |
| Floor Usage Rate | 2 oz per 10 to 12 sq ft |
| Counter Machine Speed | 900 RPM maximum, 600 RPM preferred |
| Floor Machine | 130 to 160 lb (59 to 73 kg), 175 RPM maximum |
| Pad Type | Hog's hair pad (not included) |
| Developer | MB Stone Professional® |
What is this powder made of?
Black silicon carbide. That abrasive is what cuts the uniform flat honed finish into the stone.
Which stone is it meant for?
Medium to dark honed granite. It produces a smooth, uniform honed finish on the face of the stone.
What grit is available?
Coarse, 70 grit.
How much powder does a job take?
On counters, about 1/2 teaspoon covers a 2 to 3 sq ft working area. On floors, 2 oz covers 10 to 12 sq ft.
What machine and speed should I use?
On counters, a right-angle grinder or polisher at no more than 900 RPM, with 600 RPM preferred. On floors, a machine weighing 130 to 160 lb (59 to 73 kg) spinning at no more than 175 RPM.
Do I need to prepare the surface first?
Yes. Remove all debris, sand and dirt, mask anything that could be hit by splatter, and strip off any topical coating or crystallizer.
How do I finish the job?
Keep the slurry wet until the desired result is reached, then rinse well and pick up the water with a wet/dry vacuum.
⚠ WARNING: Cancer and Reproductive Harm — www.P65Warnings.ca.gov. Always wear appropriate PPE.
