FILA WET — Solvent-Based Wet-Look Consolidating Sealer for Unpolished Stone
Recogida disponible en Dynamic Stone Tools Warehouse (Manassas Park, VA)
Normalmente está listo en 2 horas
FILA WET — Solvent-Based Wet-Look Consolidating Sealer for Unpolish...
Descripción
Descripción
FILA WET — Solvent-Based Wet-Look Consolidating Sealer for Unpolished Stone
FILA WET is a solvent-based consolidating protector that gives a wet-look finish to untreated stone while protecting it from water and oil. Developed for tumbled, flame and natural-sawn surfaces, it deepens colour, does not yellow with age and does not shed its film.
| Property | Detail |
|---|---|
| Brand | FILA |
| Product Type | Solvent-based consolidating wet-look sealer |
| Suitable Surfaces | Unfinished marble & granite, unpolished natural stone & agglomerates, tuff |
| Finish | Wet look — intensifiable with additional coats |
| Coverage | 108–215 sq ft per liter (10–20 m²), per coat |
| Dilution | None — ready to use |
| Coats | 1 coat; repeat after 24 hours; 3rd coat for very absorbent materials |
| Foot Traffic | Wait 24 hours after the last coat |
| Reapplication | Weather-exposed areas about every 2 years |
| Application Temperature | 41–86°F (5–30°C) |
| Storage Temperature | 32–86°F (0–30°C) |
| TDS Revision | REV. 00 — 09/03/2020 |
- Provides a wet effect that can be intensified with several applications
- Does not yellow with ageing or environmental conditions
- Does not scrape or shed its film from the surface
- Water- and oil-repellent consolidating protection
On a clean, dry surface apply one even, continuous coat with a brush. After 24 hours repeat in the same way; a third coat may be needed on very absorbent materials. Do not apply on terracotta, polished or very smooth surfaces, or on supports subject to rising damp and standing water (showers, saunas). Do not apply outdoors if rain is forecast within 24 hours.
Wear appropriate PPE. Follow manufacturer instructions and safety regulations.
