FILA PW10 — Water-Based Anti-Contaminant Back Sealer (1 Gallon)
En este momento, la recogida no está disponible en Dynamic Stone Tools Warehouse (Sterling, VA)
Ships same day from Sterling, VA on orders placed before 12 PM ET. Questions about fit or use? Call 703-957-4544.
Buying for a business? Trade pricing is on dynamicstonetools.net.
Descripción
Descripción
FILA PW10 — Water-Based Anti-Contaminant Back Sealer (1 Gallon)
FILA PW10 is a water-based, ready-to-use anti-contaminant back sealer. It is applied to the back and sides of natural stone, granite, marble, agglomerates, terracotta and other absorbent materials to prevent mineral deposits from rising through the substrate and causing streaks or stains from efflorescence.
| Property | Detail |
|---|---|
| Brand | FILA |
| Product | PW10 — ANTI-CONTAMINANT BACK SEALER |
| Type | Water-based, VOC-free, ready to use, no dilution needed |
| Suitable Surfaces | Back and sides of natural stone, granite, marble, agglomerates, terracotta and absorbent materials |
| Application - 5-Side Protection | Clean the back and 4 sides and make sure they are dry. Apply an even coat with a large, flat paintbrush or airless sprayer without pooling. Let the 4 sides and back dry completely before installing |
| Application - 6-Side Protection | For high humidity: clean all 6 sides, apply an even coat by paintbrush or airless sprayer, or immerse the material for about 30 seconds, then blot residue with a cloth. Install when completely dry |
| Application - Post-Installation | On a clean, dry surface apply until saturated with a large, flat paintbrush or airless sprayer, then blot residue with a cloth; the surface dries in 6 hours |
| Drying (Pre-Installation) | About 12 hours at 68°F to 104°F (20°C to 40°C); about 24 hours at 50°F to 68°F (10°C to 20°C) |
| Application Temperature | 50°F to 86°F (10°C to 30°C) |
| Coverage - 1 Gallon | 410-600 sq ft (38-56 m²) per coat (coverage rates are indicative) |
| Storage Temperature | 41°F to 86°F (5°C to 30°C) |
| Warning | Do not apply on the top surface of polished surfaces. On materials with mesh or resin on the back, apply only to the sides or top surface. Verify the most suitable adhesive with the manufacturer. Airless spraying only by professionals with appropriate PPE |
| Packaging | 1 gallon (3.78 L); 4 plastic bottles per box |
- Water-based and VOC-free
- Blocks mineral deposits rising through the back and sides that cause efflorescence streaks and stains
- Does not form a film; allows breathability so water vapor can escape
- Does not significantly affect bonding (UNI EN 1348-2009, ASTM C482-02 R-2009)
- Blocks blackening caused by pollution, carbonation, sulfate attack and biodeterioration
- Certified INDOOR AIR COMFORT GOLD; PFAS free
PW10 is applied to the back and sides of tiles and slabs before installation to block contaminants rising through the substrate. FILA describes it as made for all natural stone, terracotta and absorbent materials, for floors, stairs and wall coverings. It can also be applied post-installation to minimize water absorption on the top surface.
Wear appropriate PPE. Follow manufacturer instructions and safety regulations.
