Bosch Bulldog Xtreme 11255VSR 1 in. SDS-plus Rotary Hammer
En este momento, la recogida no está disponible en Dynamic Stone Tools Warehouse (Sterling, VA)
Ships same day from Sterling, VA on orders placed before 12 PM ET. Questions about fit or use? Call 703-957-4544.
Buying for a business? Trade pricing is on dynamicstonetools.net.
Descripción
Descripción
Bosch Bulldog Xtreme 11255VSR SDS-plus Rotary Hammer
The Bosch Bulldog Xtreme 11255VSR is a 120V SDS-plus rotary hammer with a keyless 1 in. (25.4 mm) chuck. It combines an 8.0 amp motor with 2.0 ft-lb (2.7 J) of EPTA impact energy and weighs 6.7 lb (3.0 kg). Bosch lists a maximum hole diameter of 1 in. (25.4 mm) in concrete.
Features
- Three modes of operation: rotary hammer, rotation only and hammer only
- Vario-Lock positioning that rotates and locks the chisel in one of 36 positions
- Variable-speed trigger with reversing for accurate bit starting
- Integral clutch that disengages torque transmission if the bit binds
- SDS-plus system for tool-free bit changes
- Ergonomic D-handle plus a HammerHook for hanging the tool on the job
- Rotating brush plate for equal power in forward and reverse
- Supplied with an auxiliary handle, depth gauge and carrying case
- Disconnect the plug from the power source before making any assembly, adjustments or changing accessories.
- To change the mode, depress the release button and turn the selector dial right or left.
- Select Hammer Only mode when using demolition or chipping bits such as bull points, chisels, spades and gouges.
- Let the tool come to a complete stop before turning the selector dial, because shifting during rotation of the chuck can cause damage.
- To set Vario-Lock, turn the selector dial to the Vario-Lock setting, rotate the locking sleeve with the accessory to the desired position, then turn the dial to Hammer Only and turn the sleeve slightly so it locks into position.
- Put the bit in contact with the workpiece before pulling the trigger to extend bit life and do neater work.
| Property | Detail |
|---|---|
| Brand | Bosch |
| Model | 11255VSR |
| Drive System | SDS-plus |
| Chuck | Keyless, 1 in. (25.4 mm) |
| Voltage | 120V |
| Amperage | 8.0 A |
| Impact Energy (EPTA) | 2.0 ft-lb (2.7 J) |
| No-Load Speed | 0–1,300 RPM |
| No-Load Blows | 0–5,800 BPM |
| Max. Hole Diameter in Concrete | 1 in. (25.4 mm) |
| Max. Hole Diameter, Thin-Wall Core Bit | 2-5/8 in. (66.7 mm) |
| Max. Hole Diameter in Steel | 1/2 in. (12.7 mm) |
| Max. Hole Diameter in Wood | 1-1/4 in. (31.8 mm) |
| Optimal Concrete Capacity Range | 3/16 in. to 5/8 in. (4.8 to 15.9 mm) |
| Length | 17.25 in. (438 mm) |
| Height | 6 in. (152 mm) |
| Width | 3.5 in. (89 mm) |
| Weight | 6.7 lb (3.0 kg) |
| Variable Speed / Reverse | Yes / Yes |
| Works With | 18V On-Tool Dust Extractor GDE18V-26D, other dust extraction/collection hoods, HDC100, HDC200, right angle attachment RHA-50, keyless 3-jaw chuck with SDS-plus shank HA3JAW |
| Included | Rotary hammer, auxiliary handle, depth gauge, carrying case |
What is the largest hole this rotary hammer drills in concrete?
Bosch lists a maximum hole diameter of 1 in. (25.4 mm) in concrete and 2-5/8 in. (66.7 mm) with a thin-wall core bit. The optimal concrete capacity range is 3/16 in. to 5/8 in. (4.8 to 15.9 mm).
Can it drill stone?
The Bosch manual states that carbide-tipped bits are used for drilling stone, concrete, cement, brick, cinder block and other unusually hard non-metals.
Can it use straight-shank bits?
The drive system is SDS-plus. The Bosch manual says the 3-Jaw Chuck with SDS-plus shank adaptor accessory can convert the tool for use with straight-shank bits.
What is included?
Bosch lists the rotary hammer, an auxiliary handle, a depth gauge and a carrying case.
⚠ WARNING: Cancer and Reproductive Harm — www.P65Warnings.ca.gov. Always wear appropriate PPE.
