1
of
2
Loading...
Description
Description
Weha 3 x 3/8 in Rodding Blade for Stone Countertop Reinforcement
The Weha 3 x 3/8 in (76 x 9.5 mm) rodding blade cuts the narrow channel used to embed reinforcement rod across cooktop and sink cutouts in stone countertops. The narrow kerf is sized for typical fiberglass or steel rodding products used in granite and engineered-stone fabrication.
Features
- 3 in (76 mm) blade diameter
- 3/8 in (9.5 mm) cutting kerf for rodding channels
- For granite, marble, and engineered stone countertop rodding
- Used to reinforce around cooktop and sink cutouts
| Property | Detail |
|---|---|
| Brand | Weha |
| Part Number | 51399 |
| Diameter | 3 in (76 mm) |
| Kerf | 3/8 in (9.5 mm) |
| Use | Stone countertop rodding-channel cuts |
| Unit Weight | 1.1 lb (0.5 kg) |
- Mount on a compatible router or grinder per the saw spec.
- Run wet at moderate speed.
- Take a single pass at the marked-out channel depth.
- Embed the rod with structural adhesive after dust removal.
- Wear ANSI Z87 eye protection and a dust-rated respirator.
- Inspect the tool/accessory before each use; remove from service if cracks, deformation, or excessive wear are visible.
- Follow OSHA and local site safety procedures at all times.
Always wear appropriate PPE. Follow local safety regulations when using power tools or material-handling equipment.
