1
of
2
Loading...
Description
Description
Weha Locking Disc for T-31 Anchor Machine — Replacement Part
Replacement locking disc for the Weha T-31 anchor drilling machine used to install undercut anchors in stone for cladding and panel installation. The locking disc is part of the spindle clamp / tool-retention assembly.
Features
- Replacement locking disc for the Weha T-31 anchor machine
- Spindle clamp / tool-retention component
- Direct-fit OEM replacement
| Property | Detail |
|---|---|
| Brand | Weha |
| Part Number | 141913 |
| Type | Locking disc — replacement part |
| Compatible System | Weha T-31 Anchor Machine |
| Unit Weight | 1.1 lb (0.5 kg) |
- Power off and lock out the T-31 machine before service.
- Remove the worn locking disc per the T-31 service documentation.
- Install the new disc and verify proper clamp action.
- Test on a representative anchor before returning to production.
- Wear ANSI Z87 eye protection and a dust-rated respirator.
- Inspect the tool/accessory before each use; remove from service if cracks, deformation, or excessive wear are visible.
- Follow OSHA and local site safety procedures at all times.
Always wear appropriate PPE. Follow local safety regulations when using power tools or material-handling equipment.
