1
of
4
Loading...
Description
Description
Weha Hand Slide for EP Lifter — Stone Fabrication and Repair
Replacement hand-slide assembly for the Weha EP series stone-slab lifters used in fabrication and installation. The hand slide is the operator-actuated control mechanism used to engage and release the vacuum lifter on slab loads.
Features
- Replacement hand-slide assembly for Weha EP lifter
- Operator-actuated vacuum control
- Direct-fit replacement for EP series lifters
| Property | Detail |
|---|---|
| Brand | Weha |
| Part Number | 122578 |
| Type | Hand-slide control assembly — EP lifter replacement |
| Application | Stone fabrication and installation lifting |
| Unit Weight | 33 lb (15 kg) — package |
- Take the EP lifter out of service before any disassembly.
- Remove the worn hand-slide assembly per the lifter service documentation.
- Install the replacement and verify smooth actuation through the full stroke.
- Test the lifter on a representative load before returning to service.
- Wear ANSI Z87 eye protection and a dust-rated respirator.
- Inspect the tool/accessory before each use; remove from service if cracks, deformation, or excessive wear are visible.
- Follow OSHA and local site safety procedures at all times.
- Never use a vacuum lifter without a function test after service.
Always wear appropriate PPE. Follow local safety regulations when using power tools or material-handling equipment.
