Tenax Marble Stain & Etch Remover Kit — TeClean Poultice + TeEt...
Description
Description
Tenax Marble Stain & Etch Remover Kit — TeClean Poultice + TeEtch Compound for Stone
This Tenax kit pairs TeClean stain-remover poultice powder with TeEtch etch-remover compound to remove absorbed stains and repair acid etching on stone. TeClean draws stains out of the stone with a poultice, while TeEtch mechanically removes etch and water marks and re-polishes the surface back to its original finish.
| Property | Detail |
|---|---|
| Brand | Tenax |
| Product | Marble Stain & Etch Remover Kit (TeClean + TeEtch) |
| TeClean Chemistry | Poultice stain-remover powder |
| TeEtch Removes | Etch marks, water marks, water rings, dull spots and light scratches |
| TeEtch Surfaces | Marble, travertine, limestone, alabaster and onyx (calcareous stone) |
- Two-stage kit — removes absorbed stains and repairs acid etching
- TeClean poultice powder draws stains out of the stone
- TeEtch polishing compound removes etch and water marks and re-polishes
- Restores calcareous stone back toward its original factory finish
TeClean: mix the powder with water to a toothpaste consistency over the stain, cover with plastic wrap punched with several toothpick holes, and remove the poultice 24–48 hours after it dries; use distilled water on calcareous stones such as marble or limestone. TeEtch: apply a spoonful over the etch or water mark and rub with a cloth for 2–3 minutes to mechanically remove the blemish and re-polish.
Wear appropriate PPE. Follow manufacturer instructions and safety regulations.
