Tenax Marble Rust & Etch Remover Kit — TeRust Poultice + TeEtch Compound for Stone
Pickup currently unavailable at Dynamic Stone Tools Warehouse (Sterling, VA)
Ships same day from Sterling, VA on orders placed before 12 PM ET. Questions about fit or use? Call 703-957-4544.
Buying for a business? Trade pricing is on dynamicstonetools.net.
Description
Description
Tenax Marble Rust & Etch Remover Kit — TeRust Poultice + TeEtch Compound for Stone
This Tenax kit combines TeRust rust-remover powder with TeEtch etch-remover compound to tackle two of the most common problems on stone: rust staining and acid etching. TeRust uses a chelate-based poultice to draw rust out of the stone, while TeEtch is a polishing compound that mechanically removes etch and water marks and re-polishes the surface.
| Property | Detail |
|---|---|
| Brand | Tenax |
| Product | Marble Rust & Etch Remover Kit (TeRust + TeEtch) |
| TeRust Chemistry | Chelate-based rust-stain poultice powder |
| TeRust Surfaces | Granite, marble, travertine, limestone, terrazzo, concrete, brick and sanded grout |
| TeEtch Removes | Etch marks, water marks, water rings, dull spots and light scratches |
| TeEtch Surfaces | Marble, travertine, limestone, alabaster and onyx (calcareous stone) |
- Two-stage kit — removes rust staining and repairs acid etching
- TeRust chelate poultice draws rust out of the stone
- TeEtch polishing compound mechanically removes etch and water marks and re-polishes
- Covers a wide range of natural stone and masonry surfaces
TeRust: mix the powder with water to a toothpaste consistency over the rust stain, cover with plastic wrap punched with several toothpick holes, and remove the poultice 24–48 hours after it dries. TeEtch: apply a spoonful over the etch or water mark and rub with a cloth for 2–3 minutes to mechanically remove the blemish and re-polish. Note: calcium-based stones may etch during rust removal and require re-polishing.
Wear appropriate PPE. Follow manufacturer instructions and safety regulations.
