1
of
8
Loading...
Description
Description
Tenax Frankfurt Diamond Brush 24 — Stone Texturing & Antiquing Diamond Brush
The Tenax 25DIAMFF024 is a Frankfurt-mount diamond brush in the 24 grit grade, used for stone texturing and antiquing on Frankfurt-compatible automated and manual machines. Diamond bristles deliver an aggressive texture pass that sets up the subsequent finer-grit brushes in the antique-finish workflow. The Tenax DIAMFF series is the standard brush family for leathered and antiqued slab finishes.
Features
- Frankfurt-mount diamond brush
- Grit 24 — aggressive texture / starter pass
- Sets up finer-grit Tenax DIAMFF brushes in the antique workflow
- Compatible with manual and automated Frankfurt machines
- Designed for granite, marble, and engineered stone
- Italian Tenax brush quality
| Property | Detail |
|---|---|
| Brand | Tenax |
| Part Number | 25DIAMFF024 |
| Mount | Frankfurt |
| Grit | 24 |
| Type | Diamond brush (texturing) |
| Application | Granite, marble, engineered stone antique / leathered finish |
- Mount the brush on a Frankfurt-compatible spindle.
- Verify water feed for wet-process texturing.
- Run the brush across the slab at the recommended feed and pressure for the stone type.
- Step up through finer-grit brushes (36, 46, 80, 120, 180) for the desired final antique depth.
- Flush the brush after use to extend service life.
- Wear ANSI Z87 eye protection, hearing protection, and a dust-rated respirator.
- Use cut-resistant gloves where applicable.
- Verify the tool is rated for the stone material before starting.
- Inspect the tool before each shift; remove from service if cracks or excessive wear are visible.
Always wear ANSI Z87 eye protection, hearing protection, and a dust-rated respirator when running stone abrasives. Verify wet water feed before each cut where applicable.
