Description
Description
Tenax Aggressive Diamond Brushes — 14 cm (Fickert L140)
Heavy-cut diamond texturing brushes in the 14 cm (Fickert L140) format, built for extremely dense granite and engineered stone. A high bristle count with embedded diamond abrasive filaments breaks the factory polish, opens the surface and creates deep leathered, antique or heavy textured finishes where standard silicon carbide brushes cannot cut. Used in sequence on automatic polishing lines or manual machines.
Features
- High bristle density for consistent surface contact
- Embedded diamond abrasive for cutting dense materials
- Breaks and removes factory polish
- Creates deeper texture than Filiflex or Airflex brushes
- Uniform wear and predictable finish progression
- Grits 24, 36, 46, 60 and 120 for a full texturing sequence
| Part No. | Grit | Use |
|---|---|---|
| CLR3D024 | 24 | Heavy stock removal and deep surface structuring |
| CLR3D036 | 36 | Heavy stock removal and deep surface structuring |
| CLR3D046 | 46 | Heavy stock removal and deep surface structuring |
| CLR3D060 | 60 | Refines the texture while keeping a natural, tactile finish |
| CLR3D120 | 120 | Refines the texture while keeping a natural, tactile finish |
- Fit the brushes to a polishing head that takes 14 cm (Fickert L140) abrasives.
- Start with the lowest grit to break the factory polish and open the surface.
- Work up through the grits in sequence; each higher grit refines the texture left by the one before.
- Stop at the grit that gives the depth of leathered, antique or heavy texture you want.
| Brand | Tenax |
| Product Type | Aggressive diamond abrasive brush |
| Configuration | 14 cm (Fickert L140) |
| Grits | 24, 36, 46, 60, 120 |
| Abrasive | High-density bristles with embedded diamond abrasive filaments |
| Machines | Automatic polishing lines and manual machines |
| Materials | Engineered stone, quartz surfaces, ultra-compact materials, extremely dense granite |
| Finishes | Leathered, antique and heavy textured |
What are these brushes for?
Breaking factory polish and opening the surface of hard, dense materials to create leathered, antique or heavy textured finishes.
Which grit should I start with?
Start low (24–46) for heavy stock removal and deep structure, then move up to 60 and 120 to refine the texture.
How do they compare with Filiflex or Airflex brushes?
They cut deeper. Tenax builds them to texture dense granite and engineered stone that standard silicon carbide brushes cannot cut effectively.
Which machines do they fit?
Polishing heads that take 14 cm (Fickert L140) abrasives, on automatic lines or manual machines.
⚠ WARNING: Cancer and Reproductive Harm — www.P65Warnings.ca.gov. Always wear appropriate PPE when using power tools.
