ICR Sprint L17 Anti-Drop Solvent-Based Sealer — Oil- & Water-Re...
Description
Description
ICR Sprint L17 Anti-Drop Solvent-Based Sealer — Oil- & Water-Repellent Impregnator for Marble & Granite
ICR Sprint L17 Anti-Drop is a solvent-based, oleo-hydro-repellent impregnating sealer that protects marble, granite and natural stone from water, oils and fats in a single application. It penetrates easily without forming a film on the surface, leaves the stone's natural look unchanged, and resists over time even outdoors, shielding against moisture and atmospheric pollution. Available in 25.4 fl oz (750 mL) and 1.32 gal (5 L) sizes.
| Property | Detail |
|---|---|
| Brand | ICR Sprint (Industria Chimica Reggiana spa) |
| Product | Sprint L17 Anti-Drop Solvent Base |
| Type | Solvent-based oleo-hydro-repellent impregnator |
| Finish | Natural look — no surface film |
| Color | Colorless / transparent |
| Use environment | Interior and exterior |
| Surfaces | Marble, granite, natural stone and cementitious materials; polished, honed or flamed finishes |
| Protects against | Water, oils, fats and atmospheric pollution/smog |
| Base chemistry | Solvent-based blend, primarily ethyl acetate carrier |
| Flash point | 25°F (−4°C) — highly flammable |
| Boiling point | 171°F (77°C) |
| Country of origin | Italy |
| Sizes | 25.4 fl oz (750 mL), 1.32 gal (5 L) |
- Single-solution oleo-hydro-repellent impregnation for marble, granite and stone.
- Penetrates without forming a surface film — keeps the natural look.
- Protects against water, oil and grease staining indoors.
- Weather-resistant outdoors, shielding against moisture and pollution over time.
- Colorless, non-yellowing impregnation.
- Food-safe once fully dry.
Apply to clean, dry marble, granite or natural stone with a cloth, brush, roller, sponge mop or terry applicator. Avoid puddling and wipe off any residue with a clean cloth or steel wool. Apply at 50–90°F in relative humidity under 90%, allowing roughly 30 minutes between coats. Two coats are generally recommended for damp or exterior use, up to three coats on very porous materials such as pavers or brick. Coverage varies with stone porosity: approximately 151–189 sq ft/gal on high-porosity stone, 189–341 sq ft/gal on medium-porosity stone, and 378–568 sq ft/gal on low-porosity, dense stone (first coat; later coats cover more area). Because this is a highly flammable solvent-based product, use only in a well-ventilated area away from heat, sparks and open flame, and wear appropriate PPE. Always test an inconspicuous area first.
Highly flammable solvent-based product. Use in a well-ventilated area away from heat, sparks and open flame. Wear appropriate PPE and follow manufacturer instructions and safety regulations.
