Revolution MAXIMUM Stone Sealer — Premium Solvent-Based Fluoropolymer Impregnator for Natural Stone
Pickup currently unavailable at Dynamic Stone Tools Warehouse (Manassas Park, VA)
Description
Description
Revolution MAXIMUM Stone Sealer — Premium Solvent-Based Fluoropolymer Impregnator for Natural Stone
Revolution MAXIMUM is a maximum-strength, natural-look impregnating sealer for all natural stone, formulated with the latest solvent-based fluoropolymer technology to protect against the toughest oil- and water-based stains. It penetrates deep and lets the stone breathe while leaving the natural appearance unchanged. It is odorless, uses an FDA-compliant solvent, and is suitable for interior and exterior use. Available in quart, gallon, 5-gallon and 55-gallon drum.
| Property | Detail |
|---|---|
| Brand | Revolution Stone Products |
| Product | MAXIMUM Stone Sealer |
| Chemistry | Solvent-based fluoropolymer impregnator (FDA-compliant solvent) |
| Finish | Natural look (non-color-enhancing) |
| Coverage | 200–1,500 sq ft per gallon, depending on stone type and application method |
| Coats | 1–2 (second coat on porous surfaces 30 min after the first) |
| Dwell / penetration | 15–30 minutes, then wipe off excess before drying |
| Cure time | 24–72 hours (test area: full 24-hour cure) |
| Foot traffic | May begin after 5–7 hours (cover if used sooner) |
| Expected wear | Interior 3–5 years; exterior 1–3 years with proper care |
| Application tools | Low-pressure pump sprayer, roller or paint brush |
| Surfaces | Granite, marble, travertine, limestone, sandstone, slate, saltillo, terrazzo, clay products and grout |
| Use environment | Interior and exterior |
| Odor | Odorless; FDA-compliant solvent |
| Handling | Combustible — keep container closed, store cool, use in a well-ventilated area |
| Sizes | Quart, gallon, 5-gallon, 55-gallon drum |
- Latest solvent-based fluoropolymer technology for maximum stain protection.
- Repels the toughest oil- and water-based stains while keeping the natural look.
- Breathable — allows proper air transmission through the stone.
- Odorless and formulated with an FDA-compliant solvent.
- Rated interior 3–5 years / exterior 1–3 years of protection with proper care.
Make sure the surface is clean, dry and free of waxes and coatings, and let new grout cure at least 24 hours. Mask off adjacent areas, then apply a liberal, even coat with a low-pressure pump sprayer, roller or paint brush. Let the sealer penetrate, spreading any excess to ensure even coverage, and wipe off all remaining sealer before the surface dries. Apply a second coat on more porous surfaces 30 minutes after the first. Always test an inconspicuous area first (24-hour cure) to confirm the desired result. Do not aerosolize.
Wear appropriate PPE. Follow manufacturer instructions and safety regulations.
