Description
Description
FILA WET ECO — Water-Based Wet-Look Colour-Enhancing Protector
FILA WET ECO is a water-based, plant-based wet-look colour-enhancing protector for unpolished natural stone, agglomerates and terracotta. It intensifies colour, resists heavy traffic and weathering, and carries VOC-free, EMICODE EC1 Plus and Indoor Air Comfort Gold certifications for low environmental impact.
| Property | Detail |
|---|---|
| Brand | FILA |
| Product Type | Water-based wet-look colour-enhancing protector |
| Suitable Surfaces | Unpolished natural stone, unpolished agglomerates, terracotta |
| Finish | Wet-look colour enhancement |
| Coverage — Stone & Agglomerates | 108–215 sq ft per liter (10–20 m²), per coat |
| Coverage — Terracotta | 75–215 sq ft per liter (7–20 m²), per coat |
| Dilution | None (dilute 1:1 with water on low-absorbency slate, Botticino or Carrara marble) |
| Coats | 2 coats — second coat 2–3 hours after the first |
| Foot Traffic | After 12 hours; full cure in 24 hours |
| Certifications | A+ French VOC, EMICODE EC1 Plus, LEED (ACP), Indoor Air Comfort Gold, VOC-free |
| Frost Resistance | Does not alter terracotta frost resistance (UNI EN ISO 10545-12) |
| Application Temperature | 50–86°F (10–30°C) |
| TDS Revision | REV. 04 — 05/02/2025 |
- Eco-friendly, water-based and plant-based formula
- High resistance to heavy traffic and weathering — suitable for driveways, barbecues, kitchens
- Does not peel or yellow; prevents surfaces from flaking
- VOC-free with Indoor Air Comfort Gold certification
Shake before use. Apply evenly and continuously to a clean, dry surface with a flat paintbrush or fleece pad, wetting the grout lines. Apply a second coat 2–3 hours later and wait at least 12 hours before walking on the surface. On low-absorbency stone dilute 1:1 with water. Do not use on polished surfaces or apply outdoors if rain is forecast. Clean tools with water.
Wear appropriate PPE. Follow manufacturer instructions and safety regulations.
