DiStar Multigres Diamond Blade 4.5"–5" – High-Speed Cutting for Ceramic & Porcelain Tile

DiStar Multigres Diamond Blade 4.5"–5" – High-Speed Cutting for Ceramic & Porcelain Tile

DiStar Multigres Diamond Blade 4.5"–5" – High-Speed Cutting for Ceramic & Porcelain Tile is a professional DiStar diamond blade engineered for stone fabrication.

Features

• The DISTAR 1A1R MULTIGRES blade is specially designed for cutting of ceramic tiles for walls and floors. Excellent cutting of ceramics, marble and porcelain gres. Equipped with a standard mounting hole diameter of 22.2 mm, which allows it to be used on any angle grinder with the ability to work with a 125 mm blade. DISTAR MULTIGRES has an ultra-thin diamond layer of 10 mm in height and 1.4 mm thickness, which makes the work as simple and productive as possible, thanks to a high level of performance that reaches 2 linear meters per minute. When testing the blade on porcelain gres, the lifetime was almost 5 square meters and 440 running meters, which is quite good for a tool used in dry cutting. There is also a high quality and clean edge cutting, which is important when working with tiles. Positioning of gres diamond cutting blades for angle grinders Performance parameters are given for following conditions: cutting the material indicated on the charts; cutting with 125 mm blade diameter; working with operational angle grinder with a power of 1.4 kW, with a rotational speed of 11 000 rpm; at an air temperature of +25 C. The data is for information only. Under other operating conditions the performance parameters may vary. Material: porcelain gres, 10 mm. See symbols
• Specifications: Diameter: 125 mm | Mounting hole: 22.23 mm | 125 mm: 125 | 49 mm: 22.23 | Thickness: Distar

Wear appropriate PPE. Follow manufacturer instructions and safety regulations.