Bellinzoni Idea HP Antistain Protective Afent Natural Color

Idea HP Clear protective agent studied to protect stones against water, oil, grease and humidity. IDEA HP penetrates deep into the stone, blocks the efflorescence and let the stone breaths and does not change the natural colour of the stone; does not create unsightly plastic film.Laboratory test shows IDEA HP resists well to UV rays and the colour does not change even after prolonged time. IDEA HP is perfectly clear and leave unaltered the original stone colour. Most suitable for façade, table, kitchen, vanity tops etc. It prevents mildew formation. Method of Use: Surface must be clean and dry; stains, mildew, crusting must be scraped off otherwise they will be harder to remove after protection. Application can be done by brush, by roller or by spray gun. It is suggested, when possible, to apply the product by brush because it allows the product to penetrate better into the stone. Application of IDEA HP by brush, making pressure, will facilitate penetration into frames and cavities. Continuously repeat the application, without interruption, until the stone has been saturated (the stone does not absorb further product). During the application and subsequent drying, the temperature of the substrate should be between 10 and 30°C. In case of application on floor with underfloor heating system turn off heating and allow the stone to cool completely. Coverage: For protection of marble and granite polished or grinded after grid 800, with 1 liter (1 quart) of product is possible to treat 15/25 sqm (170/270 sq.ft.) In case of calcareous stone, limestone, sand stone, concrete polished or grinded after grid 800 with 1 liter of product, it is possible to treat 10/15 sqm (110/170 sq.ft.).