Bellinzoni Idea Gold Antistain Protective Agent Natural Color 1 L

Bellinzoni Idea Gold Antistain Protective Agent Natural Color 1 L

Bellinzoni Idea Gold Antistain Protective Agent Natural Color 1 L is a Bellinzoni cleaning product designed for safe and effective use on natural and engineered stone. Bellinzoni — chemistry for stone since 1937, ISO 9001:2015.

Features

• IDEA GOLD Solvent based, high performance, penetrating nanotechnological protective, anti-stain and hydro /oil repellent and hardener. Product can be applied to both polished and textured materials. Retains natural surface colour of the material without leaving surface films. Protects materials from water and humidity-based stains, oils, greases and fats from penetrating surface. Reduces the formation of Mold, mildew and protects stone against freeze-thaw and efflorescence.
• Method of Use: ALWAYS TEST PRODUCT FIRST following below indications, before proceeding with complete product application. Ensure that surfaces to be treated are completely dry and clean, free of dirt, dust, grime and surface incrustations. Cover and protect all surrounding areas before proceeding with application. Manual: Product is ready for use. Apply a coat of product uniformly using a soft bristled brush, microfiber cloth, wax applicator or a roller to material. Allow surface to absorb product for 5 minutes before applying a second coat of product (where needed). Remove all eventual excess product, pooling or residues within 15 minutes using a clean cotton cloth, dry roller or microfiber, until all excess product is absorbed. Airless: (spray) Using a low pressured hand-held spray or airless, apply product maintaining a distance from surface of 20-25 cm. Allow product to be absorbed into surface before applying a second coat as indicated above. On vertical surfaces, apply two coats of product wet on wet. Start at the bottom and work the way up. Dry up and remove eventual product drips. Place tarp or plastic protective sheeting below the treated area to catch eventual drips. Notes: During application, product should be applied to materials with temperature between 10 and 30C. Before application to floors with underfloor heating, turn off all heating and allow floor to cool completely before product application. Maintain product in its original container/packaging. Always test product first.
• Coverage: Marble, granite and terrazzo: 15/25 m² * Calcareous stones, sandstones, Marble/cement: 10/15m²* (*) depending on the number of coats, texture and porosity of the surface.
• Packaging: Available in the following sizes: 250ml, 1 lt., 5 lt., 25 lt. Technical Data Sheet

Industrial chemical product. Use only in well-ventilated areas. Wear chemical-resistant gloves and eye protection. Read the Bellinzoni Safety Data Sheet (available from the manufacturer) before use.