Alpha COTR-03 Pneumatic Reversible Cut-Off Tool
Pickup currently unavailable at Dynamic Stone Tools Warehouse (Sterling, VA)
Ships same day from Sterling, VA on orders placed before 12 PM ET. Questions about fit or use? Call 703-957-4544.
Buying for a business? Trade pricing is on dynamicstonetools.net.
Description
Description
Alpha® COTR-03 Pneumatic Reversible Cut-Off Tool
The Alpha® COTR-03 is a compact 8-1/16" pneumatic cut-off tool with a special reversible hub: a single collar reverses the cutting wheel between left- and right-hand rotation so the operator can always direct sparks and debris away from the body. A 0.85 HP (0.63 kW) motor spins a 3" (75mm) abrasive wheel at 20,000 RPM, with rear exhaust and a safety throttle lever. The tool ships with an Alpha® Ultracut ABM 3" blade (ABM0338), a 14–19 mm double-ended spanner and a 4 mm hex key for wheel changes — ready to work straight out of the case.
Features
- Reversible wheel rotation — switch direction with a single collar
- Direct sparks and debris away from the operator on either hand
- Compact 8-1/16" body for tight metal-fabrication work
- 0.85 HP (0.63 kW) motor — 20,000 RPM free speed
- Rear exhaust design keeps debris and oil mist clear of the cut
- Safety throttle lever prevents accidental start-up
- Ships with Ultracut ABM 3" blade (ABM0338), 14–19 mm spanner and 4 mm hex key
- One year manufacturer tool warranty
| Part No. | Power | Free Speed | Disc Size | Length | UPC |
|---|---|---|---|---|---|
| COTR-03 | 0.85 HP (0.63 kW) | 20,000 RPM | 3" (75mm) | 8-1/16" (204mm) | 749173560187 |
- Connect a clean, dry, lubricated compressed-air supply to the 1/4" NPT inlet (3/8" ID hose).
- Regulate air pressure to 90 PSI (6.2 bar) at the tool inlet.
- Rotate the directional collar to select left- or right-hand wheel rotation so sparks travel away from your body.
- Mount a 3" (75mm) cut-off wheel with a 3/8" (10mm) arbor using the included spanner and hex key.
- Wear ANSI-rated eye and hearing protection and cut-resistant gloves.
- Bring the wheel to full speed before contacting the workpiece; let the wheel cut — do not side-load or twist.
- For directional changes during a job, stop the tool, switch the collar, then restart.
- Add a few drops of pneumatic tool oil at the air inlet daily (end of shift) to lubricate the motor.
- Note: the COTR-03 is not designed for flush cutting due to its direct-drive geometry.
3" (75mm) — Pneumatic Reversible Cut-Off Tool — COTR-03
| Part No. | COTR-03 |
| UPC | 749173560187 |
| Size | 3" (75mm) |
| Type | Pneumatic Reversible Cut-Off Tool |
| Max RPM | 20,000 RPM |
| Recommended For | Metal fabrication, automotive restoration, directional-spark applications |
| Packaged Weight | 2.55 lbs |
| Package Dimensions | 9.5" x 5" x 3.5" |
| Commodity Code | 8464.20.0120 |
| Country of Origin | Taiwan |
| Property | Detail |
|---|---|
| Tool Type | Pneumatic Reversible Cut-Off Tool |
| Motor Power | 0.85 HP (0.63 kW) |
| Free Speed | 20,000 RPM |
| Wheel Size | 3" (75mm) |
| Arbor | 3/8" (10mm) |
| Length | 8-1/16" (204mm) |
| Weight (Tool) | 2.0 lbs (0.9 kg) |
| Air Inlet | 1/4" NPT |
| Recommended Hose ID | 3/8" (10mm) |
| Air Consumption | 4 CFM (113 L/min) |
| Recommended Operating Pressure | 90 PSI (6.2 bar) |
| Noise Level | 83 dB(A) |
| Reversible | Yes — collar-actuated, left or right rotation |
| Included | Ultracut ABM 3" blade (ABM0338), 14–19 mm spanner, 4 mm hex key |
| Country of Origin | Taiwan |
| Warranty | 1 Year (Tool) |
What size compressor does the COTR-03 need?
A 3 HP or larger garage-grade compressor is sufficient. Air consumption is 4 CFM at 90 PSI.
What makes the COTR-03 "reversible"?
A single collar at the head reverses wheel rotation between left- and right-hand, so the operator can always direct sparks and debris away from the body.
Can it perform flush cutting?
No. The direct-drive design does not allow flush cutting.
Does it include an Ultracut ABM blade?
Yes — one Ultracut ABM 3" blade (ABM0338) ships with every tool, along with a 14–19 mm spanner and a 4 mm hex key.
Is a dust shroud available?
No dust shroud is currently available for this tool.
Can I use it on the jobsite?
Yes, anywhere compressed air rated for 4 CFM at 90 PSI is available.
What maintenance does it need?
Apply a few drops of pneumatic tool oil at the designated oil port at the end of each shift to lubricate the motor.
No product-specific videos are currently available from the manufacturer or DST.
⚠ WARNING: Cancer and Reproductive Harm — www.P65Warnings.ca.gov. Always wear appropriate PPE.






