Description
Description
Akemi Transformer Quartz — Enhancer and Sealer
AKEMI® Transformer Quartz is a solvent-based, color-enhancing impregnating sealer developed for the edges and surfaces of quartz and engineered stone. It penetrates the surface to deepen and enrich the stone’s natural color and veining — ideal for evening out the tone of cut or dripping edges to match the polished factory face — while leaving a water-, oil-, and dirt-repellent barrier. The finish is UV-resistant and non-yellowing, absorbs without forming a film or leaving residue, and is suitable for both indoor and outdoor use.
- Color intensification — deepens and enriches the natural color of quartz and engineered stone
- Edge matching — harmonizes cut/dripping edges with the polished factory surface
- Stain protection — repels water, oil, and everyday soiling
- UV-resistant & non-yellowing — holds color even in direct sunlight
- No residue — penetrates without a surface film, with high coverage
This product is offered in the following options — select your choice above:
| Size | Item Reference |
|---|---|
| 1 L | CARE.12062 |
| 250 mL | CARE.12063 |
| Property | Detail |
|---|---|
| Brand | Akemi |
| Manufacturer | AKEMI GmbH, Nuremberg, Germany |
| Product Type | Color-enhancing impregnating sealer (enhancer & sealer) |
| Chemical Basis | Solvent-based impregnation in a hydrocarbon (C9–C10) solvent carrier |
| Color / Effect | Intensifies & deepens stone color; UV-resistant, non-yellowing |
| Surface Type | Quartz / engineered-stone edges & surfaces (also natural stone) |
| Use Location | Indoor and outdoor |
| Tool Cleaner / Thinner | AKEMI® Nitro-Dilution |
| Available Sizes | 250 mL (8.5 fl oz) · 1 L (33.8 fl oz) |
| Manufacturer Part Number | CARE.12062, CARE.12063 |
- Intensifies and deepens the natural color and veining of quartz and engineered stone
- Evens out the color of cut or dripping edges to match the polished factory surface
- Water-, oil-, and dirt-repellent stain protection for everyday spills
- UV-resistant and non-yellowing — keeps its color in direct sunlight
- Penetrates the surface without forming a film or leaving residue
- High spreading rate and easy application to surfaces and edges
- Solvent-based; suitable for both interior and exterior work
Developed for quartz & engineered stone:
- Countertops, backsplashes, and tabletops
- Fabricated and dripping edges — to match the polished factory face
- Window sills, flooring, and wall coverings
- Also usable on natural stone surfaces and edges
Best on polished and honed surfaces, indoors or outdoors. Always prepare a sample area first to confirm the degree of color enhancement and appearance.
- Make sure the surface is clean, completely dry, and free of all coatings and residues.
- Test an inconspicuous sample area first to confirm the color result and appearance.
- Apply the product undiluted in a thin, even coat with a brush, mop, or pad, allowing it to be absorbed by the stone.
- After a few minutes — before it dries — wipe off all excess with a soft, absorbent cloth. Buff polished surfaces until any haze is removed.
- On very absorbent surfaces, apply a further coat if needed.
- Clean tools with AKEMI® Nitro-Dilution before the product dries.
- Flammable liquid and vapor (contains hydrocarbon C9–C10 solvent) — keep away from heat, sparks, and open flame.
- Protect surrounding solvent-sensitive materials (synthetics, rubber, lacquered parts).
- For spray application, avoid forming aerosols and do not breathe vapors.
- Industrial chemical product — use only in well-ventilated areas and wear chemical-resistant gloves and eye protection. Always consult the AKEMI Safety Data Sheet (SDS) before use.
Industrial chemical product. Use only in well-ventilated areas. Wear chemical-resistant gloves and eye protection. Consult the AKEMI Safety Data Sheet (available from the manufacturer or stein.akemi.de) before use. Technical values are manufacturer figures and may vary with jobsite conditions.
