Akemi Mixing Nozzle Dental Tip for 1:1 Cartridges 50 ml - Precision Dispenser
Pickup currently unavailable at Dynamic Stone Tools Warehouse (Sterling, VA)
Ships same day from Sterling, VA on orders placed before 12 PM ET. Questions about fit or use? Call 703-957-4544.
Buying for a business? Trade pricing is on dynamicstonetools.net.
Description
Description
Akemi Mixing Nozzle — Dental Tip for 1:1 50 mL Cartridges
This static mixing nozzle is the disposable applicator tip for AKEMI® two-component adhesives supplied in 1:1, 50 mL twin cartridges. As the two components are pushed through the nozzle’s internal helix they are blended to a uniform, ready-to-use mix, while the fine, tapered “dental” tip places the adhesive precisely into narrow joints, chips, and hairline repairs. Fit a fresh nozzle for each fill so the mix ratio and cure stay reliable.
- Thorough static mixing — blends both components as they dispense
- Fine dental tip — precise placement in tight joints and chips
- For 1:1, 50 mL twin cartridges of AKEMI two-component adhesive
- Single-use consumable — swap a fresh nozzle per fill
| Property | Detail |
|---|---|
| Brand | Akemi |
| Type | Static mixing nozzle with fine dental tip |
| Fits | AKEMI® 1:1 50 mL twin cartridges |
| Function | Blends both components on dispensing for a ready-to-use mix |
| Use | Single-use consumable |
| Manufacturer Part Number | MISC.14031 |
- Internal helix mixes resin and hardener evenly as the cartridge is dispensed
- Fine, tapered dental tip for accurate placement in narrow joints, chips, and cracks
- Eliminates hand-mixing for consistent, bubble-free results on small repairs
- Matched to AKEMI® 1:1, 50 mL twin-cartridge adhesives
- Load the 50 mL twin cartridge into the matching dispensing gun.
- Before fitting the nozzle, dispense a small amount to level both pistons so the components start evenly.
- Push a fresh mixing nozzle onto the cartridge outlet and secure it.
- Dispense; the adhesive emerges pre-mixed and ready to place through the dental tip.
- Leave the used nozzle in place to cap the cartridge between uses, and fit a new nozzle for the next application.
- Observe the safety guidance and Safety Data Sheet for the adhesive being dispensed.
- Work in a well-ventilated area and wear chemical-resistant gloves and eye protection when handling adhesives.
Accessory item. Follow the safety instructions and Safety Data Sheet of the two-component adhesive used with this nozzle. Work in a well-ventilated area and wear chemical-resistant gloves and eye protection.
