Akemi Epoxy Remover 1000 ml - Professional Epoxy Residue Cleaner for Stone
Pickup currently unavailable at Dynamic Stone Tools Warehouse (Sterling, VA)
Ships same day from Sterling, VA on orders placed before 12 PM ET. Questions about fit or use? Call 703-957-4544.
Buying for a business? Trade pricing is on dynamicstonetools.net.
Description
Description
Akemi Epoxy Remover — Water-Based Alkaline Cleaner (Ready-to-Use)
AKEMI® Epoxy Remover is an aqueous, alkaline cleaner with highly active additives and no pungent odor. It dissolves and removes epoxy-resin joint mortar, resin residues, sealings and similar contamination from natural and artificial stone, concrete ashlar, clinker and ceramics — indoors and out. Because it is water-based and free of acids, it is safe to use on acid-sensitive stone such as marble and limestone, where an acidic cleaner would etch the surface. Its liquid to slightly viscous body allows controlled application, and it arrives ready to use.
- Removes cured epoxy — joint mortar, resin residue and sealing contamination
- Water-based & acid-free — safe on marble, limestone and other acid-sensitive stone
- No pungent odor — free of acids, lyes and chlorinated hydrocarbons (CHC)
- Ready to use — no mixing or dilution required
- Indoor & outdoor — for a wide range of mineral surfaces
| Property | Detail |
|---|---|
| Brand | Akemi |
| Manufacturer | AKEMI GmbH, Nuremberg, Germany |
| Product Type | Water-based alkaline epoxy cleaner (ready-to-use) |
| Chemical Basis | Aqueous, alkaline; free of acids, lyes and chlorinated hydrocarbons (CHC) |
| Consistency | Liquid to slightly viscous |
| pH Value | 14 (strongly alkaline) |
| Density | Approx. 8.85 lb/gal (1.06 g/cm³) |
| Odor | No pungent odor |
| Preparation | Ready to use (no dilution) |
| Manufacturer Part Number | CARE.11983 |
- Removes joint mortar based on epoxy resins, plus resin residues, sealings and similar contamination
- Water-based and acid-free — safe on acid-sensitive stone such as marble and limestone
- Free of acids, lyes and chlorinated hydrocarbons, with no pungent odor
- Liquid to slightly viscous body for controlled application on inclined surfaces
- Works indoors and outdoors on a wide range of mineral surfaces
- Supplied ready to use — no mixing required
Removes: epoxy-resin joint mortar, resin residues, sealings and similar contamination.
Suitable for:
- Natural stone — including acid-sensitive marble and limestone, plus granite
- Artificial stone, terrazzo and ceramics
- Concrete ashlar and clinker
- Slate and cotto
- Indoor and outdoor surfaces
- Apply the ready-to-use product to the contaminated surface.
- Allow it to act on the epoxy residue, supporting the process with a brush or scrubber as needed.
- Rinse thoroughly with water until all loosened residue and excess product are removed.
- Repeat on stubborn or thick residues if necessary.
Always prepare a sample area first to confirm compatibility, cleaning power and material consumption before treating the full surface.
- Strongly alkaline (pH 14) — causes severe skin burns and eye damage; may cause respiratory irritation.
- Contains 2-aminoethanol and potassium hydroxide.
- Avoid contact with materials that are sensitive to alkalis; if in doubt, test on an inconspicuous area first.
- Industrial chemical product — use only in well-ventilated areas and wear chemical-resistant gloves and eye protection. Always consult the AKEMI Safety Data Sheet (SDS) before use.
Industrial chemical product — strongly alkaline. Use only in well-ventilated areas. Wear chemical-resistant gloves and eye protection. Consult the AKEMI Safety Data Sheet (available from the manufacturer or stein.akemi.de) before use. Technical values are manufacturer figures and may vary with jobsite conditions.
