Akemi ColourBond Pre-Tinted Epoxy 250 mL Cartridge
Description
Description
Akemi ColourBond Pre-Tinted Two-Component Cartridge Adhesive
AKEMI® Colour Bond is a gel-like, two-component, colour-matched bonding compound based on epoxyacrylate resin dissolved in styrene. Pre-tinted from a palette of more than 50 shades, it is engineered for seamless, colour-adjusted bonding of engineered (quartz) stone as well as natural stone, ceramics, and large-format techno ceramics. Its smooth, slightly gel-like body does not form filaments, cures fast, and polishes beautifully — so joints on Silestone, Caesarstone, Dekton, Neolith and similar surfaces virtually disappear. Supplied in the 250 mL twin cartridge for clean dosing and mixing through a static nozzle.
- Colour-matched — more than 50 pre-tinted shades for near-invisible seams
- Very fast hardening — grind, mill or drill in about 20–40 minutes
- Excellent polishability with very good surface drying
- Cartridge system — smooth, filament-free flow; easy dosing and mixing
- Food-contact safe once hardened — certified by an external German testing institute
- Low VOC — 12 g/L (ASTM D2369)
This product is offered in the following options — select your choice above:
| Color | Item Reference |
|---|---|
| CC 2200 Transparent Magic | EPOX.46091 |
| CC 1150 White Magic | EPOX.46111 |
| CC 1160 White Magic | EPOX.46112 |
| CC 1680 Cream Magic | EPOX.46121 |
| CC 1780 Beige Magic | EPOX.46131 |
| CC 1890 Gray Magic | EPOX.46141 |
| CC 1000 Black | EPOX.47001 |
| CC 1010 Black | EPOX.47002 |
| CC 1020 Black | EPOX.47003 |
| CC 1030 Black | EPOX.47004 |
| CC 1040 Black | EPOX.47005 |
| CC 1100 White | EPOX.47011 |
| CC 1120 White | EPOX.47013 |
| CC 1130 White | EPOX.47014 |
| CC 1140 White | EPOX.47015 |
| CC 1220 Red | EPOX.47023 |
| CC 1230 Red | EPOX.47024 |
| CC 1510 Blue | EPOX.47052 |
| CC 1600 Cream | EPOX.47061 |
| CC 1620 Cream | EPOX.47063 |
| CC 1640 Cream | EPOX.47065 |
| CC 1650 Cream | EPOX.47066 |
| CC 1660 Cream | EPOX.47067 |
| CC 1670 Cream | EPOX.47068 |
| CC 1700 Beige | EPOX.47071 |
| CC 1720 Beige | EPOX.47073 |
| CC 1705 Beige | EPOX.47074 |
| CC 1715 Beige | EPOX.47075 |
| CC 1725 Beige | EPOX.47076 |
| CC 1735 Beige | EPOX.47077 |
| CC 1750 Beige | EPOX.47078 |
| CC 1760 Beige | EPOX.47079 |
| CC 1770 Beige | EPOX.47080 |
| CC 1800 Gray | EPOX.47081 |
| CC 1805 Gray | EPOX.47082 |
| CC 1815 Gray | EPOX.47083 |
| CC 1830 Gray | EPOX.47084 |
| CC 1840 Gray | EPOX.47085 |
| CC 1850 Gray | EPOX.47086 |
| CC 1860 Gray | EPOX.47087 |
| CC 1880 Gray | EPOX.47089 |
| CC 1900 Khaki | EPOX.47091 |
| CC 1920 Khaki | EPOX.47093 |
| CC 1940 Khaki | EPOX.47095 |
| CC 1950 Khaki | EPOX.47096 |
| CC 1960 Khaki | EPOX.47097 |
| CC 2000 Brown | EPOX.47101 |
| CC 2010 Brown | EPOX.47102 |
| CC 2030 Brown | EPOX.47104 |
| CC 2040 Brown | EPOX.47105 |
| CC 2050 Brown | EPOX.47106 |
| CC 2060 Brown | EPOX.47107 |
| Property | Detail |
|---|---|
| Brand | Akemi |
| Manufacturer | AKEMI GmbH, Nuremberg, Germany |
| Product Type | Two-component (2K) colour-matched bonding compound |
| Chemical Basis | Epoxyacrylate resin dissolved in styrene |
| Consistency | Smooth, slightly gel-like — does not form filaments |
| Colour | Pre-tinted — palette of more than 50 shades |
| Working Time | 6-min type: approx. 5–7 min · 12-min type: approx. 10–12 min, at 68°F (20°C) |
| Ready to Work (grind/mill) | 6-min type: approx. 20–30 min · 12-min type: approx. 30–40 min, at 68°F (20°C) |
| Bending Strength | 10,150–11,600 psi (70–80 N/mm², DIN EN ISO 178) |
| Tensile Strength | 5,800–7,250 psi (40–50 N/mm², EN ISO 527) |
| Compressive Strength | 14,500–15,950 psi (100–110 N/mm², DIN EN ISO 604) |
| Density | Approx. 1.10 g/cm³ (9.2 lb/gal) |
| VOC Content | 12 g/L (ASTM D2369) |
| Thermal Resistance (cured) | Good adhesion to 140–158°F (60–70°C); up to 212–230°F (100–110°C) under low strain |
| Tool Cleaner | AKEMI® Nitro-Dilution (uncured product) |
| Shelf Life | Approx. 1 year stored cool and frost-free in the tightly closed original container |
- Very good workability from a smooth, slightly gel-like body that does not form filaments
- Very fast hardening (approx. 15–40 minutes) with very good surface drying
- Excellently polishable for invisible, colour-matched seams
- More than 50 colours available for seamless bonding of many engineered-stone types
- Improved protection against yellowing
- Very good adhesion on engineered, natural and artificial stone, including at elevated temperatures
- Resistant to water, petrol, and mineral oils
- After hardening, harmless on contact with food — certified by an external German testing institute
- Low VOC (12 g/L); meets LEED v4 EQc2 / SCAQMD Rule 1168 for multipurpose construction adhesives
Recommended for colour-matched bonding of:
- Engineered / quartz stone — e.g. Caesarstone®, Silestone®, Zodiaq®, Corian®
- Natural stone and ceramics
- Large-format techno ceramics — e.g. Dekton®, Lapitec®, Neolith®, Laminam®, Kerlite®, Maxfine
Keep bond layers thin (< 1 mm). Only moderate adhesion on fresh, alkaline building materials (e.g. concrete). Bonds frequently exposed to humidity and frost have limited durability.
- Thoroughly clean, dry, and slightly roughen the surfaces to be bonded.
- Remove the clasp, insert the cartridge in the gun and work the grip until material emerges from both openings, then screw on the mixing nozzle. Discard the first 4 in. (10 cm) pressed from the nozzle.
- Keep bond layers as thin as possible (less than 1 mm) to limit shrinkage and heat build-up.
- The 6-minute type stays workable approx. 5–7 min; the 12-minute type approx. 10–12 min at 68°F (20°C). Do not work the 12-minute type below 68°F (20°C).
- Work can continue on the cured bond (grinding, milling, drilling) after approx. 20–30 min (6-minute type) or 30–40 min (12-minute type) at 68°F (20°C). Curing is accelerated by heat and delayed by cold.
- Clean tools with AKEMI® Nitro-Dilution before the product cures.
- Wear AKEMI® Liquid Glove or chemical-resistant gloves to protect your hands.
- Do not use product that has already thickened or begun to gel.
- The hardened product has a very slight tendency to yellow.
- Once hardened, it can only be removed mechanically or with high heat (above 392°F / 200°C), not with solvents.
- Use AKEMI® original mixing nozzles only; after use, remove the nozzle and reseal with the original clasp.
- Industrial chemical product — use only in well-ventilated areas and wear chemical-resistant gloves and eye protection. Always consult the AKEMI Safety Data Sheet (SDS) before use.
Industrial chemical product. Use only in well-ventilated areas. Wear chemical-resistant gloves and eye protection. Consult the AKEMI Safety Data Sheet (available from the manufacturer or stein.akemi.de) before use. Technical values are manufacturer figures at 68°F (20°C) and may vary with jobsite conditions.
