Akemi Colour Intensifier — Wet-Look Colour Enhancer for Natural Stone
Description
Description
Akemi Colour Intensifier — Wet-Look Colour Enhancer for Natural Stone
AKEMI Colour Intensifier is a ready-to-use, solvent-based impregnation that deepens the natural colour and structure of stone without adding gloss. Containing reactive modified silicates, it penetrates the pore system and forms a breathable polysiloxane within the stone, giving a durable, non-yellowing wet-look enhancement that does not form a surface film. Suitable indoors and outdoors, and food-contact-safe after hardening.
| Property | Detail |
|---|---|
| Brand | Akemi |
| Product | Colour Intensifier |
| Type | Ready-to-use, solvent-based impregnation / colour enhancer |
| Chemistry | reactive modified silicates; forms a breathable polysiloxane in the pore system |
| Color | water-clear |
| Density | approx. 0.78 g/cm³ |
| Coverage | approx. 10–20 m²/L (approx. 410–820 sq ft/gal) |
| Dilution | apply undiluted |
| Finish | wet-look colour enhancement, no gloss layer; non-film-forming; non-yellowing |
| Application Temp | 15–25°C (59–77°F); surface fully dry |
| Redistribution / Excess Removal | approx. 10–15 min after application, as it begins to dry |
| Indoor / Outdoor | both; food-contact-safe after hardening |
| Substrates | marble, slate, limestone, granite, gneiss, concrete |
| Not For | glazed / non-absorbent surfaces; limited on fine-ground or polished stone |
| Shelf Life | 2 years (cool, tightly closed original container) |
- Deepens natural colour and structure with a wet-look, no-gloss finish
- Breathable polysiloxane chemistry — penetrates without forming a surface film
- Non-yellowing and durable
- Broad coverage — approx. 10–20 m²/L
- Suitable indoors and outdoors; food-contact-safe after hardening
- Applied undiluted; wet-in-wet coats on very absorbent stone
Enhancing and deepening the colour of absorbent natural stone — marble, slate, limestone, granite, gneiss and concrete — indoors and outdoors. Apply a thin, even layer undiluted; on very absorbent stone use several wet-in-wet applications; wipe back excess about 10–15 minutes after application. Not for glazed or non-absorbent surfaces. The product clouds below 15°C and clears again at 25°C.
Wear appropriate PPE. Follow manufacturer instructions and safety regulations.
