Akemi Antigraffiti Protective Coating - SPECIAL ORDER
Pickup currently unavailable at Dynamic Stone Tools Warehouse (Sterling, VA)
Ships same day from Sterling, VA on orders placed before 12 PM ET. Questions about fit or use? Call 703-957-4544.
Buying for a business? Trade pricing is on dynamicstonetools.net.
Description
Description
Akemi Anti-Graffiti Coating
AKEMI Anti-Graffiti is a ready-to-use, water-based protective coating built on a silicone-and-polymer emulsion. Applied as a self-priming top layer, it forms a weather-resistant, vapor-diffusible, non-yellowing barrier with a non-sticky surface that repels water and paint. On treated facades, buildings, and monuments, graffiti aerosol paint and felt-tip ink no longer bond into the surface and can be washed away with a hot-water or steam jet — no aggressive cleaner needed. pH-neutral and compatible with all building materials, it suits a wide range of absorbent mineral surfaces while deepening the color tone only minimally.
- Easy graffiti removal — paint and marker wash off with a hot-water or steam jet
- Water-based & pH-neutral — silicone-polymer emulsion, compatible with all building materials
- Breathable & weather-resistant — vapor-diffusible, non-yellowing, non-sticky surface
- Discreet finish — only minimal deepening of the color tone; dries transparent
- Water- and paint-repellent protective top layer
This product is offered in the following options — select your choice above:
| Size | Item Reference |
|---|---|
| 1 Liter | CARE.10890 |
| 5 Liter | CARE.10891 |
| Property | Detail |
|---|---|
| Brand | Akemi |
| Manufacturer | AKEMI GmbH, Nuremberg, Germany |
| Product Type | Ready-to-use, self-priming anti-graffiti protective coating |
| Chemical Basis | Water-based emulsion of silicone and polymers |
| Color | Milky-white; dries transparent |
| pH Value | Approx. 7 (neutral) |
| Density | Approx. 1 g/cm³ (8.3 lb/gal) |
| Coverage | Approx. 20–110 sq ft per liter (2–10 m²/L), depending on the surface finish |
| Application Temperature | 50–77°F (10–25°C); avoid direct sun |
| Moisture Protection | Protect from moisture/rain for at least the first 5 hours |
| Renewal Interval | Renew the coating after 3–5 years at the latest (and after graffiti removal) |
| Shelf Life | Min. 24 months, stored cool & dry at 41–77°F (5–25°C) |
| Manufacturer Part Number | CARE.10890, CARE.10891 |
- Prophylactic protection — graffiti aerosol paint and felt-tip ink can be removed with a hot-water or steam jet
- Water-based silicone-polymer emulsion; pH-neutral and compatible with all building materials
- Weather-resistant and vapor-diffusible, so the substrate can still breathe
- Does not yellow and leaves a non-sticky surface
- Water- and paint-repellent
- Causes only a minimal deepening of the color tone; dries transparent
A protective treatment for facades, buildings, and monuments on absorbent mineral surfaces:
- Natural and artificial stone
- Concrete, bricks, clinker, and sand-lime bricks
- Plaster and similar absorbent mineral bases
Not suitable for: plastics or wood (hazard of swelling), and polished or glazed surfaces (treatment causes a loss of luster). On some dark natural stones (e.g. Nero Assoluto, Nero Impala) the stone’s own structures may appear intensified — this is a characteristic of the stone, not a product defect.
- Clean the surface so it is clean, completely dry, and free of all layers. Rinse well after cleaning and allow to dry — usually 1–2 days at the earliest.
- Prepare a 10–20 sq ft (1–2 m²) sample area to check efficiency, appearance, and material consumption.
- Shake before use. Apply undiluted — at least twice (three times on highly absorbent surfaces) wet-in-wet at intervals of 15–30 minutes, using a paint brush or low-pressure sprayer (max. 1 bar). Avoid run-off.
- Best working and ambient temperature is 50–77°F (10–25°C); avoid direct sunshine.
- Protect the treated surface from moisture (e.g. rain) for at least the first 5 hours after application.
- Clean brushes, rollers, and vessels easily with water.
- To remove graffiti, use a hot-water or steam jet without cleaner additives (approx. 290–725 psi, 250–285°F, at a distance of about 4–6 in). Renew the protective coating after the graffiti has been removed.
- For professional use only.
- When spray-applying, avoid forming aerosols and risk to third parties, and do not breathe vapors (wear a protective mask).
- Do not clean treated surfaces with organic solvents or soap-based products — these act aggressively on the coating and reduce or destroy its protective effect.
- Industrial chemical product — use with adequate ventilation and wear chemical-resistant gloves and eye protection. Always read the AKEMI Safety Data Sheet (SDS) before use.
Industrial chemical product for professional use. Use with adequate ventilation and wear chemical-resistant gloves and eye protection, plus a protective mask when spraying. Consult the AKEMI Safety Data Sheet (available from the manufacturer or stein.akemi.de) before use. Technical values are manufacturer figures and may vary with jobsite conditions.
