Akemi Akepox 5030 Knife-Grade Two-Component Epoxy Adhesive — 2.25 kg
Description
Description
Akemi Akepox 5030 Knife-Grade Two-Component Epoxy Adhesive — 2.25 kg
AKEPOX 5030 is AKEMI's filled, solvent-free, two-component knife-grade epoxy for excellent weather-resistant bonding and filling in the visual range. Its creamy, vertically stable body holds on uneven and upright surfaces without sagging, curing to a high-strength, low-yellowing bond on marble, granite, ceramics, artificial stone, terrazzo and concrete — and bonds well to iron, steel and aluminum. Supplied in the 2.25 kg set.
| Property | Detail |
|---|---|
| Brand | Akemi |
| Product | AKEPOX 5030 (knife-grade) |
| Article Number | 11380 |
| Type | Two-component epoxy adhesive (solvent-free, filled) |
| Base Chemistry | Filled epoxy resin + (cycloaliphatic) polyamine hardener |
| Mixing Ratio | 2:1 (Part A : Part B) by weight or volume |
| Consistency | Creamy, vertically stable / knife-grade (thixotropic) |
| Color | light beige (Part A and Part B) |
| Pot Life (20°C / 68°F) | approx. 40–50 min |
| Pot Life (other temps) | 10°C: 100–130 min · 30°C: 20–30 min · 40°C: 10–15 min |
| Movable | after 6–8 hours (20°C) |
| Further Processing | after 12–16 hours (20°C) |
| Full Cure | maximum stability after 7 days (20°C) |
| Minimum Application Temp | do not use below 10°C (50°F) |
| Thermal Stability | approx. 60–70°C under load; 100–110°C not under load |
| Bending / Tensile / Compressive | 50–60 / 30–35 / 70–80 N/mm² |
| Density | approx. 1.50 g/cm³ |
| UV / Yellowing | very low tendency to yellow |
| Tintable | up to 5% with AKEPOX pastes/concentrates |
| Pack Size | 2.25 kg set |
- Creamy, vertically stable knife-grade body — no sag on uneven or upright surfaces
- Excellent weather resistance with a very low tendency to yellow
- Bonds stone and ceramics to iron, steel and aluminum in the visual range
- High strength — bending 50–60, tensile 30–35, compressive 70–80 N/mm²
- Solvent-free, 2:1 mix ratio by weight or volume
- Tintable up to 5% with AKEPOX pastes/concentrates
Bonding and filling of natural stone (marble, granite), ceramics, artificial stone, terrazzo and concrete to each other or to iron, steel and aluminum in the visual range; fillings, vertical areas, uneven surfaces, and anchoring of tiles and balustrades. Not suitable for polyolefins, silicones, Teflon, soft PVC, soft PU or butyl rubber.
Wear appropriate PPE. Follow manufacturer instructions and safety regulations.
