Akemi Akepox 4050 Anti-Slip Mix Two-Component Epoxy — 400 mL Cartridge
Description
Description
Akemi Akepox 4050 Anti-Slip Mix Two-Component Epoxy — 400 mL Cartridge
AKEPOX 4050 Anti-Slip Mix is AKEMI's corundum-filled, solvent-free, two-component epoxy for creating durable anti-slip stripes, edges and ornaments on stairs, entrances and wet or inclined surfaces. Applied as a thin paste layer from the 400 mL cartridge, it cures to a UV-resistant, extremely weather-resistant, R11-rated non-slip surface suitable indoors and outdoors.
| Property | Detail |
|---|---|
| Brand | Akemi |
| Product | AKEPOX 4050 Anti-Slip Mix |
| Type | Two-component epoxy, corundum-filled (solvent-free) |
| Base Chemistry | Epoxy resin + modified polyamine hardener, with corundum |
| Mixing Ratio | 2:1 (cartridge, with/without mixing nozzle) |
| Consistency | Smooth paste; apply 1 mm (optimum), max 2 mm |
| Color | anthracite, yellow, white, beige, grey (variant-dependent) |
| Density | approx. 1.92 g/cm³ |
| Pot Life (20°C / 68°F) | approx. 100–120 min |
| Pot Life (other temps) | 30°C: 45–50 min · 40°C: 20–25 min |
| Surface Dry | after approx. 3–5 hours (20°C) |
| Walk-On | after 12–16 hours (20°C) |
| Full Cure | maximum strength after 7 days (20°C) |
| Minimum Application Temp | do not use below 15°C (59°F) |
| Storage | 5–25°C |
| Slip Rating | R11; DGUV-certified |
| UV / Weather | UV-resistant and extremely weather-resistant |
| Coverage — 10 mm × 1 mm stripe | approx. 38 m per cartridge |
| Coverage — 20 mm × 1 mm / 50 mm × 1 mm | approx. 19 m / 7.6 m per cartridge |
| Pack Size | 400 mL cartridge |
- Corundum-filled epoxy — creates a durable R11 anti-slip surface
- UV-resistant and extremely weather-resistant for indoor and outdoor use
- DGUV-certified slip resistance
- Thin paste layer (1 mm optimum) from a clean 2:1 cartridge
- Ideal for stairs, entrances and wet or inclined surfaces
- Suitable for barrier-free visual-contrast stripes per DIN 18040-1
Anti-slip stripes, edges and ornaments on stairs, entrances and wet or inclined surfaces, and barrier-free visual-contrast stripes per DIN 18040-1. Suitable indoors and outdoors on silicate-bound stone (granite), concrete and ceramic; on limestone and marble, indoor use only. Remove marking tape within 10 minutes of application.
Wear appropriate PPE. Follow manufacturer instructions and safety regulations.
