Akemi Akenova Tiger Grip 50 Adhesive 290 mL Cartridge
Recogida disponible en DST Aardwolf Warehouse Pickup (Santa Fe Springs, CA)
Normalmente está listo en 2 horas
Ships same day from Sterling, VA on orders placed before 12 PM ET. Questions about fit or use? Call 703-957-4544.
Buying for a business? Trade pricing is on dynamicstonetools.net.
Akemi Akenova Tiger Grip 50 Adhesive 290 mL Cartridge
Descripción
Descripción
Akemi Akenova Tiger Grip 50 High-Tack Adhesive — 290 mL Cartridge
AKENOVA® Tiger Grip 50 is AKEMI’s stress-compensating, one-component assembly adhesive based on polyhybrid (silane-modified polymer) technology that cures with ambient humidity. It develops very high initial tack — approximately 350 kg/m² — so heavy components such as sinks, window sills, and steps grab and hold immediately, often without clamps or props. The permanently elastic, weather-resistant bond joint absorbs movement and vibration, does not bleed into natural stone, and is free of solvents, silicone, and isocyanate. Supplied in a standard 290 mL cartridge for application with an ordinary caulking gun, it bonds natural and engineered stone to mineral, metal, and wooden surfaces indoors and out.
- Very high initial tack (approx. 350 kg/m²) — holds heavy parts immediately
- Stress-compensating & elastic — absorbs movement, vibration, and thermal expansion
- No bleeding into the marginal zone on natural stone (free of plasticisers & solvents)
- Solvent-, silicone- & isocyanate-free, VOC-free, almost odourless, and paintable
- Indoor & outdoor — UV-, humidity-, and weather-resistant, vertical or horizontal
| Property | Detail |
|---|---|
| Brand | Akemi (Akenova®) |
| Manufacturer | AKEMI GmbH, Nuremberg, Germany |
| Manufacturer Trade Name | AKENOVA® Lion Grip 50 (sold in the US market as Tiger Grip 50; same article numbers, incl. 10329 on this cartridge) |
| Product Type | One-component (1K) assembly adhesive, humidity (moisture) curing |
| Chemical Basis | Polyhybrid / silane-modified polymer — solvent-, silicone- & isocyanate-free |
| Consistency / Density | Paste-like, non-sag; approx. 13.6 lb/gal (1.63 g/cm³) at 68°F (20°C) |
| Color | White (CC 1100) · Grey (CC 1830) · Black (CC 1030) |
| Initial Adhesion (High Tack) | Approx. 350 kg/m² |
| Tensile Strength | 290–363 psi (2.0–2.5 N/mm², DIN EN ISO 527-3 type 5) |
| Elongation at Break | 50–60% (DIN EN ISO 527-3 type 5) |
| Shrinkage | 3.0–3.5% |
| Final Hardness | Approx. 77 Shore A (DIN EN ISO 868) |
| Cure Depth (24 hr) | Approx. 0.06 in (1.5 mm) at 68°F (20°C) / 50% RH |
| Service Temperature | -13°F to +176°F (-25°C to +80°C) |
| VOC / Silicone / Isocyanate | Free — almost odourless, paintable after cure |
| Available Size | 290 mL cartridge |
| Shelf Life | Approx. 12 months from production, sealed, 41–77°F (5–25°C) |
| Manufacturer Part Number | NOVA.10329 |
- High initial tack (approx. 350 kg/m²) grabs and holds heavy components immediately, easing single-hand assembly
- Stress-compensating, permanently elastic bond joint that absorbs movement and vibration
- High bonding strength with an elastic joint — suited to vertical and horizontal bonding
- No bleeding in the marginal zone on natural stone, as it is free of plasticisers and solvents
- Solvent-, silicone- and isocyanate-free; VOC-free; almost odourless; paintable
- Resistant to UV, humidity and weathering; service temperature -13°F to +176°F (-25°C to +80°C)
- Suitable for indoors and outdoors; good workability and smoothability
Recommended for fast, stress-compensating bonding:
- Assembly of sinks, backsplashes, window sills, steps, skirting boards, and mirrors
- Attaching substructures and rodding to countertops
- Surface-area bonding of natural stone slabs and tiles
- Bonding natural & engineered stone — granite, quartz, quartzite, sandstone, terrazzo — to mineral, metal, or wooden surfaces
- Very good adhesion on silicate surfaces (granite, concrete, glass) and on SPC (Stone Polymer Composite)
Limited / no adhesion on: plasticised plastics, polyethylene (PE), polypropylene (PP), and PTFE — a preliminary test is necessary.
For non-silicate or absorbent substrates, and for bondings exposed to moisture, apply the appropriate AKEMI® primer (see the AKEMI primer table).
- Contact surfaces must be clean, dry, and free of grease and dust. Use AKEMI® Cleaner A on stone, tile, ceramic, glass, unpainted wood and metal; use AKEMI® Cleaner on plastics and painted surfaces.
- Apply at a working temperature of 41°F to 95°F (5°C to 35°C). On larger areas, apply parallel adhesive beads at the required thickness, spacing them so no continuous airtight layer forms (a closed layer greatly delays curing).
- Bond parts within approx. 10 minutes; smooth joints with AKEMI® Smoothing Agent.
- Skin-formation time is approx. 10–20 minutes (depending on humidity and temperature). Complete hardening also depends on layer thickness — approximately 2.5 to 3 mm cures on the first day; thick joints cure more slowly.
- For thin joints or vapour-tight substrates (metal, ceramic, glass), lightly moisten one surface just before bonding to speed core curing — otherwise core curing can take several weeks.
- Remove uncured adhesive with AKEMI® Cleaner A or I; cured adhesive can be removed only mechanically.
- For professional use only; use application equipment with a high gear ratio.
- Causes serious eye irritation and may cause an allergic skin reaction (GHS07, Warning) — wear chemical-resistant gloves and eye protection; avoid breathing vapours.
- Before full application, confirm compatibility on the actual materials — including any materials within reach of the curing vapours — to ensure no discolouration or damage occurs.
- No or only limited adhesion on plasticised plastics, PE, PP, and PTFE — carry out a preliminary test.
- Exposure to temperatures above 176°F (80°C) may discolour the bonded surface.
- Cured adhesive can be removed only mechanically.
- Store sealed in a dry, cool place at 41–77°F (5–25°C); shelf life approx. 12 months from production.
- Industrial chemical product — use only in well-ventilated areas and wear chemical-resistant gloves and eye protection. Always consult the AKEMI Safety Data Sheet (SDS) before use.
Industrial chemical product. Use only in well-ventilated areas. Wear chemical-resistant gloves and eye protection. Consult the AKEMI Safety Data Sheet before use. Technical values are manufacturer figures and may vary with jobsite conditions.
