Akemi Akenova Tiger Grip 50: High-Tack Adhesive for Stone
Tiger Grip 50 is a one-component polyhybrid adhesive with roughly 350 kg per square metre initial tack. How it works and where it belongs in a stone shop.
Dynamic Stone Tools |
Stone Fabrication News & Guides
Expert tips, how-to guides, and industry news for stone fabrication professionals. Learn about granite, marble, quartz countertop fabrication, tool maintenance, and shop management.
-
-
EV Charging and Utility Room Surfaces in Natural Stone
Garage charging walls and utility rooms are becoming finished spaces. Stone selection, clearances, moisture detailing and cleaning for a demanding location.
Dynamic Stone Tools |
-
Granite and Quartz Surfaces for Pharmacy Compounding Rooms
USP 795 and 797 demand smooth, impervious, crack-free work surfaces. What that means for stone selection, seaming, edge detail and cleaning chemistry.
Dynamic Stone Tools |
-
Fusion Quartzite: Fabricating a High-Silica Exotic Surface
Fusion quartzite pairs dramatic Brazilian colour with near-pure silica hardness. Tooling, cutting, dust control and finishing for a demanding exotic slab.
Dynamic Stone Tools |
-
Rosso Levanto Marble: Properties, Fabrication and Care
Rosso Levanto is a deep red Turkish marble with white calcite veining. Its brecciated structure, acid sensitivity and fabrication demands, explained in full.
Dynamic Stone Tools |
-
Cost Per Linear Foot: Diamond Tooling Economics for Stone Shops
Stop buying tooling on sticker price. How to calculate true cost per linear foot, capture the data, and use it to make defensible purchasing decisions.
Dynamic Stone Tools |
-
Toe Kick Fabrication and Installation for Stone Cabinetry
Fabricate and install stone toe kicks that survive mops, vacuums and feet. Sizing, substrate prep, adhesive choice and field fitting for busy stone shops.
Dynamic Stone Tools |
-
Stone Bollards, Benches, and Exterior Site Furniture
Stone bollards and benches face weather, vehicles and vandalism at once. Here is how to fabricate, anchor and specify exterior site furniture that survives.
Dynamic Stone Tools |
-
ASTM Test Methods for Dimension Stone: Reading the Numbers
Understand the ASTM test methods behind dimension stone specs, what absorption, rupture and flexural numbers mean, and how fabricators should use them.
Dynamic Stone Tools |
-
Bridge Saw Rail Alignment and Squaring: A Precision Guide
Why bridge saw rails drift out of true, how to check square with the 3-4-5 method and diagonals, shim and level the frame, and set a real check schedule.
Dynamic Stone Tools |
-
Greywacke Slabs: Fabricating Dense Sedimentary Stone
Greywacke pairs hard angular grains with a soft clay matrix. How that mismatch drives blade choice, edge work, finish limits, sealing and where the stone fits.
Dynamic Stone Tools |
-
Shop-Built Fixtures and Weld Repair in Stone Fabrication
When should a stone shop weld its own carts, stands and jigs, and when must you buy rated instead? Process choice, distortion, corrosion and the lines to hold.
Dynamic Stone Tools |
-
Stone for Correctional and Secure Facilities: A Spec Guide
Specifying and fabricating stone surfaces for correctional and secure facilities: tamper resistance, ligature detailing, chemical duty and secure installation.
Dynamic Stone Tools |
