Alpha Palm Sanding Block: A Hand-Finishing Spotlight
The Alpha Palm Sanding Block is a hook-and-loop hand-sander for stone detail work; specs, disc compatibility, and use steps from the manufacturer's data.
Dynamic Stone Tools |
Stone Fabrication News & Guides
Expert tips, how-to guides, and industry news for stone fabrication professionals. Learn about granite, marble, quartz countertop fabrication, tool maintenance, and shop management.
-
-
Alpha Sonic Wet Cutting Blade for Tile: A Chip-Free Tile Spotlight
Alpha Sonic wet cutting blade for tile: sizes, arbor, max RPM and chip-free cutting guidance for ceramic and marble tile on tile saws and angle grinders.
Dynamic Stone Tools |
-
Alpha Ultracut GPM Vacuum-Brazed Blade: A Multi-Material Spotlight
A spotlight on the Alpha Ultracut GPM vacuum-brazed diamond blade: sizes, materials it cuts, how brazed differs from sintered blades, and shop care tips.
Dynamic Stone Tools |
-
Alpha VSP-320 Variable Speed Wet Polisher: A Tool Spotlight
A close look at the Alpha VSP-320 wet polisher: 700 to 2,500 RPM range, 7 amp motor, centre water feed, inline ground-fault protection and daily maintenance.
Dynamic Stone Tools |
-
Alpha AIR-300 Pneumatic Mini Air Polisher: A Polishing Spotlight
Alpha AIR-300 mini air polisher specs: 5,800 no-load RPM, 3,500-4,500 RPM under load, 10 CFM at 87 PSI, 1.6 lbs, and a hard 4 inch accessory size limit.
Dynamic Stone Tools |
-
Alpha ESC-150/250 Wet/Dry Stone Cutter: A Tool Spotlight
A close look at the Alpha ESC-150 and ESC-250 stone cutters: 1200 W motor, single-pass 3 cm capacity, wet and dry operation, dust gate use and technique.
Dynamic Stone Tools |
-
Alpha Katana Blade: Hybrid Dry Cutting for Porcelain and Stone
A working review of the Alpha Katana hybrid diamond blade: dry cutting hard porcelain, sintered slabs, granite and marble with minimal chipping on a grinder.
Dynamic Stone Tools |
-
Alpha HardscapePro Q Turbo Rim Blade: Hardscape Cutting Guide
Alpha HardscapePro Q turbo rim dry-cutting blade in depth: Quad Drive flush cutting, wet or dry use, specs, technique, and care for hardscape contractors.
Dynamic Stone Tools |
-
Alpha COTR-03 Reversible Pneumatic Cut-Off Tool: Spotlight
Spotlight on the Alpha COTR-03 pneumatic cut-off tool: reversible hub for spark control, 20,000 RPM, 3-inch wheel, air setup, and where it fits in your kit.
Dynamic Stone Tools |
-
Alpha ATB Toolbox System: Organized Jobsite Tool Transport
The Alpha ATB Toolbox System reviewed: stackable boxes, rolling dolly, combo sets, and fitted inserts that organize stone fabrication tools everywhere.
Dynamic Stone Tools |
-
Alpha Antique Brush Wheels: Snail Lock Texture Spotlight
Spotlight on Alpha Antique Brush Wheels: creating leathered and antiqued finishes on quartz and natural stone with TYNEX filament and Snail Lock mounting.
Dynamic Stone Tools |
-
Alpha PT Cutter: Turbo Blade for Porcelain Paver Tiles
The Alpha PT Cutter is a porcelain paver turbo blade with a sintered rim and a tall 8mm diamond layer for fast, minimal-chip dry cuts on hardscape tile.
Dynamic Stone Tools |
-
Alpha Profiler Z: Zero-Tolerance Vertical Grinding for Stone
The Alpha Profiler Z-Series uses vacuum-brazed diamond to hold its true shape for sink rims, corners, and hard-stone edge profiling on water-fed polishers.
Dynamic Stone Tools |
