Afin Acryclean 500mL Solvent-based Ready-to-Use Silicone Remover fo...
Description
Description
Afin Acryclean — Solvent-Based Silicone & Residue Remover (500 mL)
afin® Acryclean is a high-purity solvent cleaner for the residue-free removal of silicone, grease, and oil from natural stone and other non-absorbent surfaces. It dissolves adhesive tapes, stickers, and foils on ceramics and polished natural stone, and cleans and degreases surfaces before bonding, sealing, or coating. Because it leaves no residue, it is a practical preparation step ahead of gluing or sealing work. afin is a brand of ARA Chemie and is distributed by AKEMI.
- Removes silicone, grease & oil — residue-free on polished natural stone
- Dissolves tapes, stickers & foils on ceramics and polished stone
- Cleans & degreases before gluing, sealing, or coating
- High-purity solvent — leaves surfaces clean and prepared
- Convenient 500 mL spray for spot work and surface prep
| Property | Detail |
|---|---|
| Brand | afin (ARA Chemie) — distributed by AKEMI |
| Product Type | Solvent-based silicone / residue remover & degreaser |
| Chemical Basis | High-purity solvent |
| Removes | Silicone, grease and oil residues; adhesive tapes, stickers and foils |
| Suitable Surfaces | Polished natural stone and non-absorbent surfaces (e.g. ceramics, metals, glass) |
| Purpose | Cleans and degreases before gluing, sealing, or coating |
| Available Sizes | 500 mL spray · 1000 mL can |
| Manufacturer Part Number | CARE.87603 |
- Residue-free removal of silicone, grease, and oil contamination
- Dissolves adhesive tapes, stickers, and foils on ceramics and polished stone
- Cleans and degreases non-absorbent surfaces prior to bonding, sealing, or coating
- High-purity solvent formulation for reliable surface preparation
Used to remove silicone, grease, oil, tapes, stickers, and foils, and to degrease before gluing, sealing, or coating on non-absorbent surfaces such as polished natural stone, ceramics, glass, and metals.
As with any solvent cleaner, test on an inconspicuous area first — solvents can affect sensitive coatings, sealed finishes, plastics, and rubber.
- Test on an inconspicuous area to confirm surface compatibility.
- Apply to the residue or contamination to be removed.
- Allow the solvent to act, then wipe away dissolved residue with a clean, lint-free cloth.
- Repeat if necessary, then allow the surface to dry fully before bonding, sealing, or coating.
Always follow the directions and precautions on the product label and Safety Data Sheet.
- Solvent-based product — keep away from heat, sparks, and open flame.
- Do not use on plastics, rubber, or coated/lacquered surfaces without testing first.
- Industrial chemical product — use only in well-ventilated areas and wear chemical-resistant gloves and eye protection. Always consult the afin / AKEMI Safety Data Sheet (SDS) before use.
Industrial solvent-based product. Keep away from ignition sources and use only in well-ventilated areas. Wear chemical-resistant gloves and eye protection. Consult the afin / AKEMI Safety Data Sheet before use. Technical values are manufacturer figures and may vary with jobsite conditions.
