Akemi Marble Filler Super 1 kg. - Highly Liquid Acrylic Adhesive
Description
Description
Akemi Marble Filler Super — Low-Viscosity Acrylic Stone Adhesive (Transparent)
AKEMI® Marble Filler Super is a low-viscosity, acrylic-based stone adhesive and filler. Its highly liquid, flowing consistency lets it penetrate and fill fine fissures and the coarse, open pores of light-coloured marble and travertine worked in a horizontal position, and it also serves very well as an injection resin. It dries fast at the surface, hardens quickly, and forms a rigid bond that polishes beautifully. Transparent by nature, it can be tinted with AKEMI® coloring pastes to match the stone.
- Highly liquid — flows into fine fissures and coarse pores
- Transparent — can be tinted with AKEMI® coloring pastes
- Very fast surface drying with fast, rigid hardening
- Excellent polishing ability
- Doubles as an injection resin for hairline repairs
| Property | Detail |
|---|---|
| Brand | Akemi |
| Manufacturer | AKEMI GmbH, Nuremberg, Germany |
| Product Type | Low-viscosity stone adhesive and filler |
| Chemical Basis | Acrylic |
| Consistency | Highly liquid / flowing |
| Color | Transparent — can be coloured |
| Hardener | Cures with the matching AKEMI® hardener (paste or liquid) |
| Working / Hardening | Short working time; fast hardening |
| Polishing Ability | Excellent |
| UV Stability | Low — recommended for interior use |
| Tool Cleaner | AKEMI® Nitro-Dilution |
- Low viscosity — flows readily into fine fissures and coarse, open pores
- Very fast surface drying with fast, rigid hardening
- Excellent polishing ability for a seamless finished surface
- Transparent and can be coloured to match the stone
- Well suited as an injection resin for hairline repairs
- Filling fissures and the coarse-pored surfaces of light-coloured marble and travertine (horizontal position)
- Injection resin for fine cracks and repairs
- Gluing and filling on light-coloured natural stone
Because of its low UV stability, AKEMI® recommends AKEMI® Marble Filler Super for interior use.
- Make sure the surfaces to be filled or bonded are clean and dry.
- Mix the filler thoroughly with the matching AKEMI® hardener until a uniform colour is achieved. If needed, tint with AKEMI® coloring pastes to match the stone.
- Work the filler into the fissures or pores while it is still liquid; it has a short working time, so mix only what you can apply.
- Allow to harden, then grind and polish flush with the surrounding stone.
- Clean tools with AKEMI® Nitro-Dilution before the material cures.
Follow the mixing ratio and cure times stated on the current AKEMI Technical Data Sheet and product label for the hardener you are using.
- Use the correct amount of hardener — too little or too much affects cure and finish.
- Do not use material that has already begun to gel or thicken.
- Test on a sample area to confirm colour match and finish before full application.
- Industrial chemical product — use only in well-ventilated areas and wear chemical-resistant gloves and eye protection. Always consult the AKEMI Safety Data Sheet (SDS) before use.
Industrial chemical product. Use only in well-ventilated areas. Wear chemical-resistant gloves and eye protection. Consult the AKEMI Safety Data Sheet (available from the manufacturer or stein.akemi.de) before use. Technical values are manufacturer figures and may vary with jobsite conditions.
