Akemi Wax Stripper 1 Liter - Wax and Coating Remover for Stone
Description
Description
Akemi Wax Stripper
AKEMI® Wax Stripper is a powerful cleaning agent based on a blend of highly effective solvents, tensides, and emulsifiers. It lifts away tar, bitumen, and even the most stubborn wax coats effortlessly, and also removes fluates, stone sealers, and polishes from natural and artificial stone. The formula is free of chlorinated hydrocarbons and is biodegradable, making it a strong yet responsible choice for stripping built-up coatings back to bare stone before resealing or refinishing.
- Strips wax, tar & bitumen — removes even the most stubborn wax coats
- Removes fluates, sealers & polishes — from natural and artificial stone
- Free of chlorinated hydrocarbons — and biodegradable
- Solvent-based concentrate — solvents, tensides and emulsifiers
| Property | Detail |
|---|---|
| Brand | Akemi |
| Manufacturer | AKEMI GmbH, Nuremberg, Germany |
| Product Type | Solvent-based wax / coating stripper |
| Chemical Basis | Highly effective solvents, tensides, and emulsifiers; free of chlorinated hydrocarbons; biodegradable |
| Removes | Tar, bitumen, stubborn wax coats, fluates, stone sealers, and polishes |
| Application Methods | Scrubber, brush, or manual application |
| Form | Concentrate |
| Available Size | 1 L |
| Manufacturer Part Number | CARE.10816 |
- Removes tar, bitumen, and even the most stubborn wax coats effortlessly
- Strips fluates, stone sealers, and polishes from natural and artificial stone
- Free of chlorinated hydrocarbons
- Biodegradable
Suitable for use on:
- Natural stone — granite, marble, and limestone
- Concrete ashlar, terrazzo
- Ceramics, slate, and cotto
- Acid-sensitive stones
Works on rough, fine-ground, ground, bush-hammered, sand-blasted, antique, sawn, and polished surfaces.
- Apply the product to the coated surface with a brush, scrubber, or by hand.
- Allow it to act on the wax, sealer, or polish to be removed.
- Work / agitate the surface, then remove the dissolved residue.
- Repeat on heavy build-up if required.
Always test on an inconspicuous area first.
- Solvent-based product — keep away from open flame and sources of ignition.
- Industrial chemical product — use only in well-ventilated areas and wear chemical-resistant gloves and eye protection. Always consult the AKEMI Safety Data Sheet (SDS) before use.
Industrial chemical product. Solvent-based — keep away from ignition sources. Use only in well-ventilated areas. Wear chemical-resistant gloves and eye protection. Consult the AKEMI Safety Data Sheet (available from the manufacturer or stein.akemi.de) before use. Technical values are manufacturer figures and may vary with jobsite conditions.
