Alpha Pro Tools Silencer III 10 Inch Dekton Poseidon Bridge Saw Blade
Pickup currently unavailable at Dynamic Stone Tools Warehouse (Manassas Park, VA)
Description
Description
Silencer III for Dekton(R)
The Alpha(R) Silencer III for Dekton(R) is a technologically advanced blade that produces excellent cuts while achieving superior cost-performance with reduced noise levels. The uniquely designed core is made of two hardened steel sheets with a thin copper sheet laminated between them. This special construction dissipates the usually high noise levels common to this application.
Features
- High-Quality Dekton(R) Blade for Bridge or Table Saws
- Fast, Chip-Free Cutting
- Superior Cost-Performance with Reduced Noise Levels
- Can Be Used On Crystallized Glass and Other Vitreous Materials
- 10mm Segment Height
- Uniquely Designed Core Is Made of Two Hardened Steel Sheets with A Thin Copper Sheet Laminated Between Them
- Available in 10”, 12”, 14”, 16” and 18”
- *Most Equipped with A 60mm Arbor and A 50mm Adapter
SLW101PD — 1.90
| Property | Detail |
|---|---|
| Size | 1.90 |
| Thickness | 749173461804 |
| Maximum RPM | 11in x 11in x 0.5in |
| Arbor(s) | 8202.39.0070 |
| Recommended For | Italy |
SLW1610D — 6.80
| Property | Detail |
|---|---|
| Size | 6.80 |
| Thickness | 749173461644 |
| Maximum RPM | 19.25in x 19.25in x 0.75in |
| Arbor(s) | 8202.39.0070 |
| Recommended For | Italy |
SLW161BD — 6.70
| Property | Detail |
|---|---|
| Size | 6.70 |
| Thickness | 749173462009 |
| Maximum RPM | 19.25in x 19.25in x 0.75in |
| Arbor(s) | 8202.39.0070 |
| Recommended For | Italy |
SLW107EG — SLW107EG
SLW18S2M — SLW18S2M
SLW1260P — SLW1260P
SLW161BP — SLW161BP
SLW161MP — SLW161MP
SLW161DE — SLW161DE
SLW167DE — SLW167DE
- Read all product documentation and safety instructions before use.
- Ensure compatibility with your existing tools and materials.
- Follow the manufacturer's recommended operating parameters.
- Inspect the product for damage before each use.
- Always wear appropriate PPE including safety glasses and hearing protection.
- Sintered Stone / Dekton
- Glass
What blade size and material is the Silencer III SLW101PD designed for?
It is the 10-inch (250 mm) Silencer III silent core blade specifically engineered for cutting Dekton and Cosentino's Poseidon ultra-compact surfaces — materials known for their hardness and tendency to chip.
What kind of saw fits a 10" Silencer III?
Any bridge saw or rail saw with a 10" (250 mm) blade capacity and matching arbor. Confirm the arbor bore (commonly 5/8" or 60 mm — verify on the product page) before mounting.
Why is it called "Silencer" — does it really run quieter?
Yes. The steel core uses laser-cut anti-noise slots and a vibration-damping layer that measurably reduces ringing and pitch compared to a standard steel core, making long ultra-compact cuts less fatiguing for the operator.
Wet or dry — how should I run this blade on Dekton?
Always run wet on Dekton/Poseidon. These materials generate heavy heat under the blade and a dry cut will glaze the diamonds and ruin the blade in minutes. Maintain steady water flow on both sides of the blade.
What feed rate works best to avoid chipping?
Start slow — roughly 30–50% slower than you would feed engineered stone — until the blade is broken in and you have read the chip pattern. Score-and-cut (a shallow first pass) on the show edge prevents top chipping.
How can I extend the blade's life on ultra-compact?
Keep the blade square, run continuous water, avoid side-loading the blade, and dress it periodically on a dressing stone if the cut starts to slow. Storing the blade flat protects the silent core.
Always wear appropriate PPE. Follow local safety regulations when using power tools or chemical products.
