Colour Bond Dispensing Gun 10:1 Ratio — 250 ml
Description
Description
Akemi Colour Bond Dispensing Gun — 10:1 Ratio, 250 ml Cartridges
The AKEMI® Colour Bond Dispensing Gun is a professional, metal-framed applicator built to dispense AKEMI® Colour Bond and Match Bond two-component cartridges at their dedicated 10:1 mix ratio. Its high 26:1 thrust ratio drives the pre-colored adhesive smoothly through a static mixing nozzle, and an innovative drip-free mechanism cuts off excess flow the moment you release the trigger — keeping joints clean and reducing waste on invisible seam work in quartz and natural stone.
- Dedicated 10:1 mix ratio — matched to AKEMI Colour Bond / Match Bond cartridges
- High 26:1 thrust ratio — steady, controlled dispensing of thick adhesive
- Drip-free mechanism — stops excess material flow for clean joints and less waste
- Durable metal frame — three-side-bar design supports and positions the cartridge
- Reusable tool — pairs with a fresh mixing nozzle for each cartridge
| Property | Detail |
|---|---|
| Brand | Akemi |
| Type | Manual cartridge dispensing gun (drip-free) |
| Mix Ratio | 10:1 |
| Thrust Ratio | 26:1 |
| Fits Cartridges | AKEMI® Colour Bond / Match Bond 250 ml, 10:1 |
| Frame Material | Metal (three-side-bar design) |
| Reusable | Yes — use a fresh mixing nozzle per cartridge |
- Purpose-built for the 10:1 mix ratio of AKEMI Colour Bond and Match Bond cartridges
- High 26:1 thrust ratio for smooth, controlled dispensing of thick adhesive
- Drip-free mechanism prevents excess material flow, keeping joints clean and reducing waste
- Robust metal frame with a three-side-bar design for cartridge support and positioning
- Reusable across many cartridges when paired with a fresh mixing nozzle each time
Designed for: AKEMI® Colour Bond and Match Bond 250 ml, 10:1 two-component cartridges — the pre-colored epoxyacrylate adhesive system used to produce strong, near-invisible joints in quartz and natural stone.
- Fit a fresh static mixing nozzle to the cartridge before dispensing.
- Insert the cartridge into the frame and advance the plunger to prime the mixer.
- Release the trigger to engage the drip-free stop and prevent run-on between beads.
- Wipe the tool clean after use; replace the nozzle for each new cartridge.
Professional application tool. Use with genuine AKEMI® Colour Bond / Match Bond cartridges and mixing nozzles. Follow the adhesive’s Technical Data Sheet and Safety Data Sheet for handling and cure information.
