Alpha Knock Out Speciality 8" Wet Cutting Blade for Trac Star 2000
Pickup available at Dynamic Stone Tools Warehouse (Manassas Park, VA)
Usually ready in 2 hours
Description
Description
Alpha Professional Tools® recognizes the growing popularity of the specialty tool, Trac Star 2000; a low RPM wet saw that utilizes a guide rail system. Evidence of this growing popularity is in the introduction of other brands of low speed track sawing systems to the market. Until now, good blade choices have been limited! Introducing the Alpha® Knock Out blade. A specialty blade specifically designed for a low RPM wet saw, to cut all granites, as well as all brands of engineered stone with minimal chipping. This blade provides a quick clean cut when used on a low RPM saw and will increase your productivity while providing a long cutting life. Alpha® Knock Out is the best blade choice for your Trac Star 2000.The Alpha® Knock Out Blade provides a solution to the dilemma!
Features
- Wet Use Only
- Recommended for Granite and Engineered Stone
- Designed for use on the Trac Star 2000 Wet Saw
- Cut Through 1-1/2" Material Very Fast with Minimal Chipping
- Chip-Free Cutting on Most Demanding Applications
| Part No. | Size | Thickness | Maximum RPM | Arbor(s) | For Use On |
|---|---|---|---|---|---|
| VTS008 | 8" | 2.3mm | 7,400 | 5/8", ◊ | Trac Star 2000 |
Question :
What materials is the Alpha® Knock Out blade designed to cut?
Answer :
This blade is designed to cut all types of granites, as well as all brands of engineered stone.
Question :
The Alpha® Knock Out blade is a wet blade, can it be used dry?
Answer :
No. Wet cutting diamond blades must be used with water to prevent excessive heat buildup during cutting. Using water on the blade also reduces dust and helps enhance the cutting performance and life. A continuous water flow is critical. Using “wet” blades without water even for a few seconds will cause excessive heat and blade damage.
Question :
What size diameter blades does Alpha® offer for the Knock Out blades?
Answer :
The Alpha® Knock Out blade is only available in 8” diameter.
Question :
What is the arbor of the Alpha® Knock Out Blade?
Answer :
This blade has a diamond shape knock-out with 5/8” arbor.
Question :
Can I use the Alpha® Knock Out blade on a standard circular saw?
Answer :
No. This blade was engineered for aggressive cutting on slower RPM saws such as the Trac Star 2000. The RPM of this saw is 1,725. If used on standard circular saws this blade may show signs glazing and the cutting action would slow down or stop, since it’s being used at higher RPM than it was intended for.
Question :
What are the recommended traverse speeds for use of the Trac Star 2000 wet saw?
Answer :
The traverse speed will differ from one material to another. If you experience the saw slowing down (front wheels spinning) during the cutting process, lower the traverse speed of the saw. This will allow the blade to cut at the same speed the saw is pushing the blade into the material.
| PartNo | Weight (Packaged) | UPS Code | Package Dimensions | Commodity Code | Country Of Origin |
|---|---|---|---|---|---|
| VTS008 | 1.00 | 749173461170 | 8.5in x 9in x 0.5in | 8202.91.0000 | Japan |
