Alpha Professional Tools Libero Blade
Pickup currently unavailable at Dynamic Stone Tools Warehouse (Manassas Park, VA)
Description
Description
Alpha® Libero Electroplated Dry-Cutting Blade
The Alpha® Libero is an electroplated diamond blade engineered for chip-free dry cutting of softer stones — marble, travertine, soapstone, alabaster, onyx and limestone — on angle grinders, stone cutters, and (in 7") worm-drive saws. Five sizes from 4" to 7" cover everything from small detail work to full-depth slab cuts.
Features
- Electroplated diamond edge engineered for chip-free cuts on softer stones
- Recommended for marble, travertine, soapstone, alabaster, onyx and limestone
- Runs dry — running wet further extends blade life
- Five sizes (4" / 4-1/2" / 5" / 6" / 7") for grinders, stone cutters and 7" worm drives
- NOT for granite or other very hard stones (electroplated diamonds will dull quickly)
| Part No. | Size | Thickness | Max RPM | Arbor(s) | For Use On |
|---|---|---|---|---|---|
| DL0478 | 4" | 0.8 mm | 14,500 | 7/8", 20 mm, 5/8" | Stone cutter / angle grinder |
| DL05A+ | 4-1/2" | 0.8 mm | 13,200 | 7/8", 20 mm | Stone cutter / angle grinder |
| DL05S | 5" | 1.0 mm | 12,200 | 7/8" | Stone cutter / angle grinder |
| DL06A+ | 6" | 1.2 mm | 10,100 | 7/8", 5/8", diamond knockout | Stone cutter / angle grinder |
| DL07A+ | 7" | 1.4 mm | 8,400 | 5/8", diamond knockout | Worm drive / angle grinder |
- Match the blade size to your tool and confirm the blade Max RPM exceeds your tool RPM.
- Mount the blade with the correct arbor bushing for your spindle (7/8", 5/8", 20 mm, or diamond knockout per part number).
- Lower the blade fully onto the work and let blade weight do the cutting — do not force feed.
- Use a steady, light-pressure pass; back the blade out and re-enter to clear the kerf on deep cuts.
- For longer life, run with light water mist where the application allows (still rated for dry use).
- Inspect the diamond layer after each job — replace once the electroplated edge is worn smooth.
4" — 7/8", 20 mm, 5/8" — Electroplated diamond blade, 0.8 mm thick — DL0478
| Part No. | DL0478 |
| UPC | 749173462108 |
| Size | 4" |
| Type | Electroplated diamond blade, 0.8 mm thick |
| Attachment | 7/8", 20 mm, 5/8" |
| Max RPM | 14,500 |
| Recommended For | Marble, travertine, soapstone, alabaster, onyx, limestone (dry or wet); NOT for granite |
| Packaged Weight | 0.20 lbs |
| Package Dimensions | 5.25" x 4.5" x 0.25" |
| Commodity Code | 8202.91.0000 |
| Country of Origin | Japan |
4-1/2" — 7/8", 20 mm — Electroplated diamond blade, 0.8 mm thick — DL05A+
| Part No. | DL05A+ |
| UPC | 749173460609 |
| Size | 4-1/2" |
| Type | Electroplated diamond blade, 0.8 mm thick |
| Attachment | 7/8", 20 mm |
| Max RPM | 13,200 |
| Recommended For | Marble, travertine, soapstone, alabaster, onyx, limestone (dry or wet); NOT for granite |
| Packaged Weight | 0.30 lbs |
| Package Dimensions | 5.5" x 5" x 0.25" |
| Commodity Code | 8202.91.0000 |
| Country of Origin | Japan |
5" — 7/8" — Electroplated diamond blade, 1.0 mm thick — DL05S
| Part No. | DL05S |
| UPC | 749173460616 |
| Size | 5" |
| Type | Electroplated diamond blade, 1.0 mm thick |
| Attachment | 7/8" |
| Max RPM | 12,200 |
| Recommended For | Marble, travertine, soapstone, alabaster, onyx, limestone (dry or wet); NOT for granite |
| Packaged Weight | 0.35 lbs |
| Package Dimensions | 6.5" x 5" x 0.25" |
| Commodity Code | 8202.91.0000 |
| Country of Origin | Japan |
6" — 7/8", 5/8", diamond knockout — Electroplated diamond blade, 1.2 mm thick — DL06A+
| Part No. | DL06A+ |
| UPC | 749173461828 |
| Size | 6" |
| Type | Electroplated diamond blade, 1.2 mm thick |
| Attachment | 7/8", 5/8", diamond knockout |
| Max RPM | 10,100 |
| Recommended For | Marble, travertine, soapstone, alabaster, onyx, limestone (dry or wet); NOT for granite |
| Packaged Weight | 0.50 lbs |
| Package Dimensions | 6" x 5.5" x 0.25" |
| Commodity Code | 8202.91.0000 |
| Country of Origin | Japan |
7" — 5/8", diamond knockout — Electroplated diamond blade, 1.4 mm thick — DL07A+
| Part No. | DL07A+ |
| UPC | 749173460623 |
| Size | 7" |
| Type | Electroplated diamond blade, 1.4 mm thick |
| Attachment | 5/8", diamond knockout |
| Max RPM | 8,400 |
| Recommended For | Marble, travertine, soapstone, alabaster, onyx, limestone (dry or wet); NOT for granite |
| Packaged Weight | 0.80 lbs |
| Package Dimensions | 7.5" x 7.5" x 0.25" |
| Commodity Code | 8202.91.0000 |
| Country of Origin | Japan |
| Property | Detail |
|---|---|
| Diamond Format | Electroplated diamond edge |
| Cutting Method | Dry (wet permissible for longer life) |
| Recommended Materials | Marble, travertine, soapstone, alabaster, onyx, limestone, fiberglass (dry) |
| Not Recommended For | Granite or other very hard stones |
| Commodity Code | 8202.91.0000 |
| Country of Origin | Japan |
What materials can I cut with a Libero blade?
Softer stones: marble, travertine, soapstone, alabaster, onyx and limestone. It also handles fiberglass when used dry.
Can I use Libero on granite?
No. Granite is too hard for an electroplated diamond edge — the diamonds will dull almost immediately. Use a sintered or brazed blade for granite.
Can I use Libero wet?
Yes. Libero is designed to run dry, but adding water will significantly extend the life of the blade.
What is the advantage of a stone cutter over an angle grinder?
A stone cutter provides better stability and accuracy than a handheld angle grinder, especially for long straight cuts and miters.
Can I use Libero on fiberglass?
Yes — use it dry on fiberglass.
Which size do I need?
Match the blade diameter to your tool. 4"-6" sizes fit angle grinders and small stone cutters; 7" fits 7" worm drives and larger angle grinders.
No product-specific videos are currently available from the manufacturer or DST.
⚠ WARNING: Cancer and Reproductive Harm — www.P65Warnings.ca.gov. Always wear appropriate PPE.
