Akemi Everclear Clear Knife Grade Urethane Adhesive (395 mL Cartridge)
Pickup currently unavailable at Dynamic Stone Tools Warehouse (Sterling, VA)
Ships same day from Sterling, VA on orders placed before 12 PM ET. Questions about fit or use? Call 703-957-4544.
Buying for a business? Trade pricing is on dynamicstonetools.net.
Description
Description
Akemi Everclear 510 Clear Knife-Grade Urethane Adhesive
AKEMI® EVERCLEAR 510 is a gel-like, solvent-free, two-component (Part A + Part B) polyurethane (2C-PUR) adhesive built for the stone-fabrication industry. Its transparent, colorless formula has excellent stability to yellowing and does not bleed into the marginal zone, which makes it ideal for bonding and filling very light-colored, white, or transparent crystalline natural and artificial stone. The smooth, knife-grade gel holds well on vertical surfaces yet still allows thin, precise glue lines, and it grinds and polishes very well once cured. It is a very-low-emission product (GEV EMICODE® EC1PLUS, emission class A+) and carries no dangerous-goods classification.
- Transparent & highly yellowing-stable — built for white, light, and transparent stone; no marginal-zone bleeding
- Knife-grade gel — holds on vertical surfaces, yet allows thin bonding joints
- Solvent-free 2C-PUR — very good to grind and polish once hardened
- Indoor & outdoor — hard stone (e.g. granite) and Techno Ceramic inside and out; soft stone (marble, limestone) indoors
- Very low emission — GEV EMICODE® EC1PLUS, emission class A+; tintable with AKEMI® Polyester Colouring Pastes (up to 2%)
| Property | Detail |
|---|---|
| Brand | Akemi |
| Manufacturer | AKEMI GmbH, Nuremberg, Germany |
| Product Type | Two-component (2C) polyurethane (PUR) reaction-resin adhesive |
| Consistency | Knife-grade gel (non-sag, holds on vertical surfaces) |
| Color | Transparent, colorless — excellent stability to yellowing |
| Mixing Ratio | 1 : 1 (Part A : Part B) — 100 g A to 100 g B |
| Working Time | Approx. 10–12 min at 68°F (20°C) |
| Parts Movable After | Approx. 2 hours at 68°F (20°C) |
| Ready to Process After | Approx. 6 hours at 68°F (20°C) |
| Full / Maximum Strength | After approx. 7 days at 68°F (20°C) |
| Bending Strength | 7,250–8,700 psi (50–60 N/mm², DIN EN ISO 178) |
| Tensile Strength | 2,900–4,350 psi (20–30 N/mm², DIN EN ISO 527) |
| Density | Part A approx. 1.10 g/cm³ (9.2 lb/gal) · Part B approx. 1.16 g/cm³ (9.7 lb/gal) |
| Recommended Application Temp. | At least 59°F (15°C); do not use below 41°F (5°C) |
| Service Temperature | Not permanently above 140°F (60°C); briefly up to 212°F (100°C) |
| Emission Class | GEV EMICODE® EC1PLUS — class A+ (very low emission) |
| Tool Cleaner | AKEMI® Universal Thinner / Dilution (uncured adhesive) |
| Shelf Life | At least 12 months from production, stored dry and cool at 41–77°F (5–25°C) in the closed original container |
| Available Formats | 395 mL cartridge · can sets |
| Manufacturer Part Number | PURE.11452 |
- 2C-PUR system with excellent stability to yellowing — safe on very light, white, and transparent stone
- No bleeding in the marginal zone around the bond line
- Gel-like, smooth consistency gives good stability on vertical areas, and allows thin bonding joints
- Solvent-free; very good to grind and polish after curing
- Suitable for hard stone (e.g. granite) and Techno Ceramic indoors and outdoors; for soft stone (marble, Jura limestone) indoors
- Very low emission (GEV EMICODE® EC1PLUS), emission class A+ confirmed by an external testing institute
- No dangerous-goods classification
- Easily colored with AKEMI® Polyester Colouring Pastes, Colouring Concentrates liquid, or Spectrum Pastes (up to max. 2%)
Mainly used for bonding & filling:
- Natural stone — marble and granite (including very light-colored and white stone)
- Artificial / engineered stone and building material — terrazzo and concrete
- Techno Ceramic
- Other materials such as plastics, paper, wood, and glass (a test bond is recommended)
Not suitable for: polyolefins (polyethylene, polypropylene), Teflon/PTFE, silicone, and other materials containing plasticizers (e.g. soft PVC).
- Thoroughly clean the surfaces to be bonded — they must be dry and free of dust, dirt, and grease. Slightly roughen smooth surfaces. (Humidity causes bubbles in the glue and a loss of stability.)
- Cartridge: remove the clasp, load the cartridge in the gun, and work the grip until material emerges from both openings; then fit the mixing nozzle. Discard the first 4 in. (10 cm) of material from the nozzle. If used without a mixing nozzle, mix both components thoroughly.
- Cans: mix 100 g of Part A with 100 g of Part B (1:1) homogeneously. The mixing ratio must be observed exactly.
- If desired, color with up to 2% AKEMI® Polyester Colouring Pastes, Colouring Concentrates liquid, or Spectrum Pastes.
- The mixture stays workable for approx. 10–12 minutes at 68°F (20°C). Bonded parts may be moved after approx. 2 hours, further processed after approx. 6 hours, and reach final stability after approx. 7 days.
- Clean tools immediately with AKEMI® Universal Thinner. Hardening is accelerated by heat and delayed by cold.
- For professional use only.
- Keep the exact 1:1 mixing ratio — excess adhesive acts as a plasticizer and may slowly cause yellowing.
- Surfaces must be dry, clean, and grease-free; humidity leads to bubbles and lost stability.
- Recommended application temperature is at least 59°F (15°C); do not use below 41°F (5°C), as it will not sufficiently harden.
- Only conditionally suitable in areas of permanent moisture or direct water contact; do not permanently expose the bond above 140°F (60°C) (briefly up to 212°F / 100°C).
- The hardened product can be removed only mechanically. Empty the container completely for proper disposal.
- Industrial chemical product — use only in well-ventilated areas and wear chemical-resistant gloves and eye protection. Always consult the AKEMI Safety Data Sheet (SDS) before use.
Industrial chemical product. Use only in well-ventilated areas. Wear chemical-resistant gloves and eye protection. Consult the AKEMI Safety Data Sheet (available from the manufacturer or stein.akemi.de) before use. Technical values are manufacturer figures at 68°F (20°C) and may vary with jobsite conditions.
