Bellinzoni Epox Premium Set (A and B) Epoxy Mastic for Gluing, Jointing and Filling

EPOX PREMIUM Two component epoxy resin with high transparency and very low yellowing for gluing, jointing and filling of various types of granites, marbles and stones, also very hard or crystalline ones, where the adhesion of polyester-based adhesives are sometimes insufficient.EPOX Premium is super transparent, has very high bonding strength and adheres well also to slightly wet stones, can fill even large flaws and correct objects of value which otherwise would be considered waste. Method of use : The parts to be bonded or filled must be clean, completely dry and free of dust; if possible, roughen them slightly. Mix thoroughly the two dosed components, in the ratio (by weight) of 2 : 1 (A : B), using small quantities of product in order to avoid waste from too fast curing (mass effect). For a good job, usually 250-300 grams (8-11 oz per mixing) at a time are sufficient per single catalysis. Pot-life (20-30 minutes a 20°C/68°F) will be longer at lower temperature and shorter at higher one; moisture can change reaction time, so it’s better to avoid high humidity. Finishing (smoothing) can be run after 6-7 hours (at 20°C/68°F) from jointing, after 14-16 hours (at 20°C/68°F) can be sanded. Complete polymerisation will be after 7 days from applications. Do not apply at temperatures below 10°C/50°F