Aardwolf ARR01 Remnant Rack: Stone Storage Organization Guide

Dynamic Stone Tools
2026-05-05T02:12:17-04:00

Stone remnants — the offcuts remaining after countertop and vanity fabrication — represent a significant source of value in any stone fabrication shop. A slab remnant from a high-value marble or exotic granite can be worth hundreds of dollars as raw material for a future small project, a repair, or a sale to another fabricator. But only if it can be found, accessed, and retrieved without damage when the opportunity arises. Disorganized remnant storage — pieces leaning against walls, stacked flat on pallets, or crowded into miscellaneous storage areas — results in damaged material, hazardous working conditions, and lost revenue from remnants that simply cannot be retrieved without moving everything around them. The Aardwolf ARR01 remnant rack is the professional solution to this challenge, and Dynamic Stone Tools Inc. (DST) carries the ARR01 for fabrication shops across North America that are serious about protecting their remnant inventory.

Aardwolf ARR01: Design, Dimensions, and Load Capacity

The Aardwolf ARR01 remnant rack is a purpose-built storage system designed specifically for stone offcuts and smaller slab pieces. Unlike generic industrial storage racks that were designed for boxes, drums, or lumber, the ARR01 accounts for the specific physical characteristics of stone storage — heavy individual pieces, high center of gravity, sensitivity to surface contact, and the need to retrieve individual pieces without moving others. These design requirements produce a rack that looks and functions very differently from generic shelving, and the difference is immediately apparent to any fabricator who has struggled with improvised remnant storage.

The vertical A-frame configuration of the ARR01 positions stone pieces at a slight angle from vertical, resting against padded support arms rather than sitting flat on horizontal shelves. This orientation is critical for stone storage because it minimizes the surface area of stone-to-stone contact, which is the primary source of scratching and edge chipping during storage. Pieces stored vertically also have a lower risk of stress cracking from their own weight than pieces stored flat on pallets, where the unsupported span between pallet boards creates bending stress in brittle stone material over time.

The padded contact points on the ARR01's support arms protect polished stone surfaces from the metal-on-stone contact that would immediately scratch or chip finished edges. These pads are replaceable, allowing the rack to maintain its protective function throughout its service life even as pad material wears under the weight and sliding friction of stone pieces being loaded and retrieved. Fabricators who use non-padded storage systems — bare steel A-frames, wooden pallets with rough surfaces, or concrete floors — accept surface damage to their remnant inventory as an unavoidable cost. The ARR01 eliminates this cost entirely.

Load capacity of the ARR01 is rated to accommodate a substantial number of remnant pieces of varying sizes and thicknesses. The base frame is designed to remain stable under this load without requiring anchoring to the floor, although anchoring is recommended in any environment where shop traffic or forklift operation occurs near the storage area. The weight distribution geometry of the A-frame configuration ensures that the rack remains stable as pieces are loaded and removed from either side, without requiring the operator to balance the rack manually during loading operations.

The footprint of the ARR01 is designed to make efficient use of shop floor space while providing genuine storage capacity. Stone shops often struggle with floor space allocation, balancing the need for adequate material storage against the workspace required for cutting, polishing, and template operations. The ARR01's compact footprint delivers meaningful remnant storage capacity in a space-efficient format that allows fabricators to reclaim floor area currently occupied by disorganized remnant piles, often freeing up space that can be put to more productive use.

Aardwolf ARR01 at a Glance
Vertical A-frame configuration for safe, stable stone storage
Padded support arms protect polished surfaces and finished edges
Replaceable pad system for long-term surface protection
Rated load capacity for substantial remnant inventory
Space-efficient footprint for stone shop floor planning
Compatible with fork pockets for positioning with a forklift
Available from Dynamic Stone Tools Inc. for North American fabricators

Why Remnant Organization Matters to Shop Profitability

The financial case for professional remnant storage infrastructure like the ARR01 is straightforward once the cost of disorganized remnant management is properly accounted for. Most fabrication shops underestimate this cost because it accumulates gradually, through individually small losses that are never attributed to storage practice. Calculating the true cost of poor remnant storage reveals why the ARR01 pays for itself quickly in a productive shop.

Remnant damage during storage is the most direct cost. A polished slab edge scratched against another piece during retrieval, a corner chipped when a remnant is shifted to access one behind it, or a crack that propagates through a piece during an awkward manual move from a disorganized pile — each of these events destroys material value that was preserved through the original fabrication process. In a shop processing dozens of remnants per week, even a ten percent rate of storage-related damage represents a significant annual loss in salvageable material value.

Time loss from disorganized remnant retrieval is the second major cost category. When a customer calls about a small repair project, or when a fabricator is selecting material for a custom vanity top, locating the right remnant from a disorganized pile can take fifteen minutes or more of labor time. In a shop with multiple employees, this search time adds up to significant labor cost each month. The ARR01's organized vertical storage makes each piece individually visible and accessible, reducing typical retrieval time from minutes to seconds and eliminating the labor waste that disorganized storage creates.

Safety costs from poor remnant storage are the most severe potential expense. A stone remnant leaning against a wall that is accidentally knocked over by a shop employee or cart movement can cause serious injury and significant property damage. Workers' compensation claims arising from stone storage accidents are not uncommon in fabrication shops with poor storage discipline. Insurance underwriters and safety inspectors consistently cite disorganized stone storage as a significant risk factor in shop safety assessments. The ARR01's stable, designed-for-purpose storage structure virtually eliminates the tip-over risk that makes improvised stone storage genuinely dangerous.

Revenue from remnant sales represents the positive side of the storage value equation. Well-organized, well-maintained remnant inventory that is visually accessible to visiting customers — homeowners, contractors, or other fabricators — generates walk-in sales opportunities that disorganized storage does not. Many fabrication shops develop a secondary revenue stream from remnant sales that contributes meaningfully to shop profitability, and this revenue stream is only possible when the remnant inventory is stored in a way that allows customers to browse and select material efficiently.

Pro Tip: Label each remnant piece in your ARR01 with a simple tag showing the material type, color name, approximate dimensions, and thickness. A fifteen-second tagging step when loading a piece into the rack saves the retrieval time spent identifying each piece later, and makes remnant browsing by customers or fabricators much faster and more productive. Use weatherproof tags that survive the moisture environment of a stone shop.

Setting Up the ARR01 in Your Fabrication Shop

Positioning the ARR01 in your shop requires consideration of several factors: access for loading and unloading, proximity to the cutting and fabrication work area, compatibility with your material handling equipment, and visibility to customers if you plan to sell from your remnant inventory. Getting the position right from the start avoids the disruptive process of relocating a loaded rack after the fact.

Loading access to the ARR01 requires clear space on both sides of the rack equal to the length of the longest remnant pieces you expect to store. If you use a vacuum lifter like the Aardwolf AVLP4 to load the rack, you need overhead crane clearance above the rack position as well. Planning the rack position with your handling equipment in mind prevents the frustrating situation of having to hand-carry heavy remnants into a rack position that the crane cannot reach due to overhead obstruction or floor-level interference.

Fork pockets on the ARR01 base allow the fully loaded rack to be repositioned using a forklift when shop layout changes are required. This feature is more valuable than it first appears — shop layouts evolve as equipment is added, workflows change, and production volumes grow. A remnant rack that can be repositioned when needed without requiring complete unloading is a practical investment in shop flexibility. When using a forklift to move a loaded ARR01, ensure that the forks are fully inserted into the fork pockets and that the load is stable before lifting, following the same safe lifting practices used for any forklift operation in the shop.

If remnant sales are part of your business model, consider positioning the ARR01 in an area that is accessible to visiting customers without requiring them to enter active production areas of the shop. A remnant display area near the shop entrance or showroom, protected from the dust and water of active fabrication operations but visible and accessible for browsing, creates a much better selling environment than asking customers to navigate through active cutting areas to see available material. The ARR01's organized vertical storage makes an effective visual display that communicates the quality and variety of your remnant inventory at a glance.

Multiple ARR01 units can be arranged in rows or groups to create a comprehensive remnant storage system for larger shops. Organizing multiple racks by material type — granite in one section, quartz in another, marble and quartzite in a third — makes material selection faster for both fabricators and customers. Adding identification signage at each rack group helps new employees and visiting customers navigate the storage system without needing to ask for assistance at every turn.

Maintenance, Long-Term Care, and Integration with Shop Workflow

The Aardwolf ARR01 is a robust steel structure designed for decades of service in stone shop conditions. Its maintenance requirements are minimal compared to powered equipment but still require periodic attention to ensure that the rack continues to protect stored material and provide safe, efficient service throughout its working life.

Inspect the support arm pads regularly for wear, tears, or compression that would reduce their protective function. Pads that have been compressed flat by heavy stone weight no longer cushion the stone surface effectively and should be replaced. Check the pad attachment method to ensure that pads are securely fastened and cannot shift position under a stone load — a pad that migrates out of position exposes bare metal to the stone surface, defeating the primary protective function of the padding system.

Inspect the base frame and support arms periodically for signs of rust, weld cracking, or deformation that might indicate the rack has been overloaded or impacted by a forklift or shop vehicle. Minor surface rust on the exterior of the frame can be treated with rust-inhibiting paint without compromising structural integrity, but cracking or deformation at welds or load-bearing members requires professional assessment before the rack is returned to service. A damaged rack that fails under load creates the same catastrophic tip-over risk that organized storage is designed to eliminate.

Integration of the ARR01 into shop workflow requires establishing clear procedures for when and how remnants are loaded. The most effective shops develop a standard practice of tagging and racking every remnant immediately after a job is cut, rather than accumulating loose pieces on the floor until the next cleanup session. This immediate-racking discipline keeps the shop floor clear, prevents the gradual accumulation of hazardous loose material, and ensures that the remnant inventory in the rack is always current and accurately represents the available material. Designating a specific rack position or section for new arrivals and establishing a regular review cycle for aging inventory prevents the rack from filling with material that has become too small or damaged to use.

At Dynamic Stone Tools Inc., we carry the Aardwolf ARR01 remnant rack along with the full Aardwolf material handling product line for fabrication shops across North America. Our team at dynamicstonetools.com can provide specifications, availability information, and guidance on how the ARR01 integrates with other Aardwolf equipment in your shop. DST supports fabricators who understand that professional material storage is not an overhead expense — it is a direct investment in the safety, efficiency, and profitability of their operation.

Organize Your Remnant Inventory with the Aardwolf ARR01
Available from Dynamic Stone Tools Inc. for professional stone fabrication shops across North America. Order the ARR01 from DST today.