Alpha Rescue Blade: A Multi-Material Demolition Blade Spotlight
Alpha Rescue Blade spotlight: a multi-material demolition blade for gas cut-off saws, with sizes, RPM limits and silica safety for countertop tear-outs.
Dynamic Stone Tools |
Stone Fabrication News & Guides
Expert tips, how-to guides, and industry news for stone fabrication professionals. Learn about granite, marble, quartz countertop fabrication, tool maintenance, and shop management.
-
-
Alpha Kirara 4-Inch Polishing Pad: A Marble Maintenance Spotlight
The Alpha Kirara 4-inch polishing pad restores polish on marble, limestone and concrete in three acid-free steps. See machines, setup, water use and pro tips.
Dynamic Stone Tools |
-
Alpha Twistouch System: A Polishing Backer Pad Spotlight
Alpha Twistouch System explained: the twist-lock backer pad and Double Magic interface for hand polishing, with verified part numbers, RPM limit and setup tips.
Dynamic Stone Tools |
-
Alpha Diamond Blade Re-Dressing Tool: A Blade Care Spotlight
Why small diamond blades glaze, what dressing does, and what Alpha publishes about its Diamond Blade Re-Dressing Tool for 4 to 6 inch angle grinder blades.
Dynamic Stone Tools |
-
Alpha Hot-Rod Channel Cutting Blade: A Slab Rodding Spotlight
Alpha Hot-Rod channel cutting blade spotlight: variants, rod sizes, AWS-110/AWS-125 setup, wet cutting and how fabricators rod sink and cooktop cutouts.
Dynamic Stone Tools |
-
Alpha Turboshine Scratch Removal System: A Polishing Spotlight
A fact-checked look at the Alpha Turboshine 3-inch rigid disc system: published grits, speed limit, DAS adapter and shop technique for seams and scratch repair.
Dynamic Stone Tools |
-
Alpha Twincur GEM Edge Polishing Wheel: A Finishing Spotlight
Alpha Twincur GEM snail-lock edge polishing wheel spotlight: published grits, colors, RPM limit, and practical tips for granite, quartz and sintered edges.
Dynamic Stone Tools |
-
Alpha ESC-125/225 Wet and Dry Stone Cutter: Blade and Setup Guide
A shop guide to the Alpha ESC-125 and ESC-225 stone cutter: blade choice by material, wet and dry setup, silica rules, guides, clamps and maintenance.
Dynamic Stone Tools |
-
Alpha ECG-900 Wet High-Speed Grinder: Complete Shop Guide
The Alpha ECG-900 is a 9 inch 110V wet high-speed grinder with Quad-W Drive. Water feed, GFCI habits, guard setup, coring, and dry-cut silica control tips.
Dynamic Stone Tools |
-
Alpha AIR-680UW: Polishing Stone and Plaster Underwater
The Alpha AIR-680UW pneumatic polisher runs fully submerged. Specs, compressor sizing, exhaust routing, and safe practice for pool and fountain repair work.
Dynamic Stone Tools |
-
Alpha EcoGuard 5" Dust Collection Cover: Silica Capture at the Source
Why the Alpha EcoGuard 5" dust shroud is the fastest route to OSHA Table 1 silica compliance: CX cutting and GX grinding setups, hoses, HEPA pairing, and care.
Dynamic Stone Tools |
-
Alpha ESC Miter Cutting Kit: Rail-Guided Miter Spotlight
Spotlight on the Alpha ESC Miter Cutting Kit — rail-guided straight, curve, and miter cuts on stone, quartz, sintered slabs, and porcelain for lamination prep.
Dynamic Stone Tools |
-
Alpha Ecoguard M Spark Buster: Controlled Metal Cutting Guide
The Alpha Ecoguard M Spark Buster turns a variable-speed grinder into a contained, kickback-free metal cutter for stone shops. Design, technique, and care.
Dynamic Stone Tools |
