The daily cleaner most fabricators reach for on both quartz and granite is a pH-neutral or acid- and lye-free spray, never a straight acid and never a high-pH degreaser left to sit on the surface. Dynamic Stone Tools stocks several built for that exact job: MB Stone Care's pH-neutral MB-5 Stone & More, AKEMI's acid- and lye-free Crystal Clean, and Tenax's Lustro Italiano Natural Stone Cleaner and Quartz Cleaner, all built for quick wipe-and-go maintenance rather than periodic restoration work. A fabricator handing off a finished countertop needs one bottle a homeowner can use every day without thinking about a pH chart or a dwell timer, and that is the gap these products are built to fill.
Granite and quartz get grouped together in cleaning advice because neither one etches the way marble does, but they fail in different ways when the wrong product is left on them too long. Granite is a siliceous stone, built mainly from silicate minerals such as quartz, feldspar, and mica, so it resists the acids found in a typical kitchen far better than a calcareous stone like marble or travertine. Engineered quartz is a different material again: a resin-bound slab whose own manufacturers warn against bleach, strong alkaline cleaners, and abrasive pads, because the resin and pigment binding it together, not a mineral lattice, are what a cleaner is actually touching. The six products below cover both situations without asking a crew to stock two unrelated chemistries.
Why Does pH Matter for Quartz and Granite Cleaners?
A neutral cleaner sits at or near pH 7, away from both the acid end of the scale, such as vinegar, lemon juice, and most bathroom descalers, and the alkaline end, such as ammonia and many heavy-duty degreasers. The Natural Stone Institute's own care guidance tells installers to "clean stone surfaces with a neutral cleaner, stone soap, or a mild liquid dishwashing detergent and warm water," and separately states that "calcium carbonate is sensitive to acidic solutions." That is why a marble or limestone counter etches from a splash of wine or citrus and a granite counter generally does not: granite's silicate minerals are not built from calcium carbonate the way marble's are.
Siliceous stone is not immune, though. The same Natural Stone Institute brochure notes that a siliceous stone "is generally resistant to most acids found in kitchen settings, although acidic cleaners are still not recommended, as these stones may contain trace levels of minerals that are acid sensitive." Granite's resistance is a matter of degree, not immunity, and the daily cleaner still has real work to do: lift grease and food film without leaving the kind of residue that builds into a dull, hazy look over months of use.
Engineered quartz runs on a different rulebook because it is not a single mineral at all. Cambria's own product-care page instructs owners not to "expose Cambria Product to abrasive, strong alkaline, acid, free radicals, oxidizers, or cleaners of the like," and separately lists bleach, oven cleaners, scouring powders, and paint strippers by name as products to keep off the surface. A cleaner that is merely "not acidic" is not automatically safe for quartz; something at the high end of the alkaline scale can be just as damaging to a resin-bound surface as an acid is to marble.
That is the detail worth checking before a daily cleaner goes into a customer's cabinet: the actual pH, not just what a label implies. AKEMI's own technical data sheet lists its Crystal Clean concentrate at roughly pH 8 to 9, mild enough to land close to neutral once diluted for use. MB Stone Care states its MB-5 Stone & More formula outright as a "pH neutral" chemistry on its own product page. Tenax's own safety data sheet for its Lustro Italiano Natural Stone Cleaner, by contrast, lists the finished spray at pH 9.5 to 11.0, solidly alkaline, even though the product is marketed as a gentle daily cleaner. None of that makes the Tenax product unusable; it is a reminder that a "pH-balanced" claim on a label and the pH value on the manufacturer's own data sheet are not always the same number, and a fabricator who checks the data sheet catches that before a customer ever does.
Which Daily Cleaners Does Dynamic Stone Tools Stock?
Six products cover the daily-to-periodic range for quartz and granite. AKEMI Crystal Clean, MB Stone Care MB-5 Stone & More, and Tenax's Lustro Italiano Natural Stone Cleaner and Quartz Cleaner are built for everyday wipe-downs. Superior Stone Cleanser and the Tenax Lustro Italiano Quartz Stone Care Kit sit a step up: a heavier degreaser for buildup and a periodic polish-and-enhance step rather than a once-a-day spray.
What Should Fabricators Avoid Using on Quartz and Granite?
Keep a few categories out of the cabinet a homeowner will actually reach for. Acidic products, such as vinegar, lemon juice, and most bathroom descalers, are the Natural Stone Institute's first warning for any calcareous stone and are unnecessary on granite or quartz, since neither needs an acid to clean well. Bleach and ammonia-based glass cleaners are the second concern: the Institute's own brochure states plainly not to mix ammonia and bleach, because the combination "creates a toxic and lethal gas," and Cambria's care page separately tells owners to keep bleach off its quartz entirely.
Abrasive pads and scouring powders are the third category. The Institute brochure notes that these "often contain abrasives that may scratch certain stones," and the same caution applies to quartz, where Cambria names Comet, Soft Scrub, and S.O.S. pads specifically as products to avoid. The fourth category is easy to miss: an undiluted, high-pH degreaser left to sit rather than sprayed, wiped, and rinsed. Cambria's instruction to avoid "strong alkaline... cleaners of the like" on quartz is the same caution that applies to any polished surface, and it is exactly why diluted-for-daily-use and full-strength-for-buildup are treated as two different jobs even out of the same bottle, which is how Superior Stone Cleanser is labeled: full strength for heavy-duty degreasing, diluted for light, daily maintenance.
How Do Quartz-Specific and Natural-Stone Cleaners Differ?
Tenax sells its Lustro Italiano daily cleaner as two separate formulas rather than one do-everything spray. The Natural Stone Cleaner is positioned for granite, marble, and other natural stone, while the Quartz Cleaner is, in the manufacturer's own words, "designed for regular use on quartz surfaces and is also effective on ceramic, porcelain, and stainless steel." Splitting the line this way lets a fabricator hand a customer the cleaner that matches the counter instead of one compromise formula for every material.
AKEMI and MB Stone Care take the opposite approach: one broad-spectrum daily cleaner across both material families. AKEMI's own site lists Crystal Clean's daily use on "polished natural and artificial stone as well as on fine stone ware, clinker and ceramics, quartz or similar," and MB Stone Care markets MB-5 Stone & More for "marble, granite, ceramic, Corian, porcelain and glass, including mirrors." The difference matters most when a kitchen has both a quartz island and a granite perimeter, or a bath with a quartz vanity top next to ceramic tile and a mirror: one bottle covers the whole room instead of two. The Institute's own stone chart is also worth remembering here, since it lists quartzite as a natural siliceous stone and separately states that quartzite "should not be confused with manufactured quartz-based materials."
| Product | What It's For | Distinguishing Property |
|---|---|---|
| AKEMI Crystal Clean | Daily degreasing cleaner for polished natural stone, quartz, and ceramic | Acid- and lye-free concentrate; dilutes 1:50 to 1:100; confirmed safe for food-contact surfaces per DIN 10516 |
| Tenax Lustro Italiano Natural Stone Cleaner | Daily hard-surface spray for granite, marble, and other natural stone | 16 fl oz; finished product listed at pH 9.5 to 11.0 on Tenax's own safety data sheet |
| Tenax Lustro Italiano Quartz Cleaner | Daily spray cleaner for quartz; also used on ceramic, porcelain, and stainless steel | 16 fl oz; non-abrasive, no harsh detergents per the manufacturer |
| MB Stone Care MB-5 Stone & More | Daily multi-surface spray for marble, granite, ceramic, Corian, porcelain, and glass | pH-neutral formula; quart or gallon refill; not intended for heavily soiled areas |
| Superior Stone Cleanser | Heavier-duty degreaser for natural and engineered stone, porcelain, sealed concrete, tile, and grout | Acid-free formula; full strength for degreasing, diluted for daily maintenance |
| Tenax Lustro Italiano Quartz Stone Care Kit | Two-step program for quartz and engineered stone | Pairs a Quartz Cleaner with a Quartz Polish & Enhancer for quartz and engineered stone |
Pro Tip: Buff a daily cleaner dry with a clean microfiber cloth instead of letting it air-dry. The Natural Stone Institute's own cleaning guidance warns that an excessive concentration of cleaner left on the surface "may leave a film and cause streaks," which is just as true on a glossy quartz surface as on polished granite.
How Should Fabricators Build a Daily vs. Periodic Care Routine?
A daily cleaner and a periodic cleaner are not the same job, even when a single product can do both at different dilutions. Superior Stone Cleanser's own instructions illustrate the split directly: the manufacturer directs users to run it full strength for heavy-duty degreasing and dilute it for light, daily maintenance cleaning. That split is a useful model even for fabricators using a different product, because the concentrate that cuts through a backsplash full of cooking grease is rarely the dilution a homeowner should be spraying on a counter every evening.
On the daily side, the job is small and frequent: lift light oil film, fingerprints, and everyday dirt before it builds into something that needs more aggressive cleaning later. AKEMI's own technical data sheet describes Crystal Clean's intended job as the simple daily removal of light oil and grease films and everyday dirt from polished stone and ceramics, and that description fits the daily-use case for any of the cleaners in the table above. A daily cleaner that is doing its job rarely needs to dwell on the surface; spray, wipe with a clean absorbent cloth, and buff dry.
The periodic side is different work: restoring shine or removing buildup a daily spray was never meant to touch. That is the model a kit like the Tenax Lustro Italiano Quartz Stone Care Kit is built around: a Quartz Cleaner paired with a Quartz Polish & Enhancer for quartz and engineered stone. In practice, fabricators run a polish-and-enhancer step occasionally rather than daily, after the cleaner has handled the everyday spray-and-wipe, since its job is restoring shine rather than lifting everyday grease. Treating a polish-and-enhance product as a daily habit wastes it, and on some finishes can leave its own buildup over time.
Fabricators who send a customer home with both a daily cleaner and a periodic product should be explicit about which bottle does which job, because a homeowner left to guess will usually reach for whichever bottle is closest, every day, regardless of what it was meant for. Labeling the daily spray clearly and setting the periodic product aside, saved for an occasional pass rather than the kitchen counter next to the sink, does more to protect a finish over the years than any single product choice on its own.
How Do You Hand a Care Routine to the Customer?
The handoff conversation at project completion is worth more than the bottle itself. Tell the customer what stone or quartz they have, which cleaner above matches it, and the short list of things never to reach for: an acidic bathroom spray, a bleach-based glass cleaner, and anything abrasive enough to leave a toilet bowl shiny. The Natural Stone Institute's reminder not to mix ammonia and bleach is worth repeating out loud, not just printing on a card that gets thrown away with the rest of the installation paperwork.
Quartz and engineered stone deserve their own version of that conversation, because the failure mode is different from natural stone. A customer who has only ever owned granite will reasonably assume that if a cleaner is not acidic, it is automatically fine, and that assumption is exactly what Cambria's own care page is written to correct: strong alkaline cleaners and abrasive pads are just as much a risk to a resin-bound surface as an acid is to marble. Fabricators who stock both a natural-stone cleaner and a quartz-specific one, as Tenax does with its two Lustro Italiano formulas, have an easy way to make that distinction concrete at handoff instead of leaving it as a verbal caveat the customer forgets by the next morning.
Two related guides cover ground this comparison does not have room for. Akemi Crystal Clean: A Food-Safe Daily Stone Cleaner Spotlight goes deeper into that one product's food-contact use in a working kitchen, and Tenax Lustro Italiano Quartz Cleaner: A Daily Care Spotlight walks through that product's own application steps in more detail than a six-product comparison has room for. If the surface in question is porcelain rather than quartz or granite, Porcelain Slab Countertop Care: Cleaners, Metal Marks and Haze is the more relevant read, since porcelain's cleaning rules differ enough from both quartz and natural stone to need their own guide.
For sealer, adhesive, or repair questions that come up alongside the daily-cleaner conversation, Dynamic Stone Tools' broader stone sealers and care collection is the place to check what else is stocked for a specific finish before recommending anything by guesswork.
Free Tool
Adhesive & Sealer Guide — Answer a few questions about your stone and project to get a manufacturer-matched adhesive, sealer, or repair product recommendation, so the daily cleaner you pick never has to fight a sealer it wasn't paired with.
Find Your Match →Stock the Right Daily Cleaner for Every Countertop
From pH-neutral daily sprays to periodic degreasers, Dynamic Stone Tools carries the cleaning chemistry fabricators hand off at project completion.
Shop Stone Cleaners →